ok when i play paper mario and when i use the rice plugin at the part where mario meets peach in the beginning and bowser takes peach's castle to the sky and when everthing is dark in the castle, mario and peach become fully black. why is that happening and can someone help me with the problem and hopefully tell me how to fix it? the direct3d plugin problem is that when i run any game a message comes and says "error creating direct3d device". i tried updating the drivers but the same message came and i even checked if the card was direct3d 8 and 9 capable at intel because my card's name is and comp specs are:
Time of this report: 12/27/2006, 16:32:39
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301-1519)
Language: English (Regional Setting: English)
System Manufacturer: Dell Inc.
System Model: Dell DV051
BIOS: Phoenix ROM BIOS PLUS Version 1.10 A04
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz (2 CPUs)
Memory: 502MB RAM
Page File: 564MB used, 659MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode
Card name: Intel(R) 82915G/GV/910GL Express Chipset Family
Manufacturer: Intel Corporation
Chip type: Intel(R) 82915G/GV/910GL Express Chipset
DAC type: Internal
Device Key: Enum\PCI\VEN_8086&DEV_2582&SUBSYS_01C41028&REV_04
Display Memory: 128.0 MB
Current Mode: 1280 x 1024 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
so there it is my comp help me and one last thing is why when i use the jabo direct 3d (any version) in paper mario that when i go to toad town after the goomba king fight that the game starts the flicker and glitch a lot? help me with that to plz. oh yea i got a hyper threaded processor (2 prossesors or 2 cpus) just to make sure that might be the cause of these problems.
Time of this report: 12/27/2006, 16:32:39
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301-1519)
Language: English (Regional Setting: English)
System Manufacturer: Dell Inc.
System Model: Dell DV051
BIOS: Phoenix ROM BIOS PLUS Version 1.10 A04
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz (2 CPUs)
Memory: 502MB RAM
Page File: 564MB used, 659MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode
Card name: Intel(R) 82915G/GV/910GL Express Chipset Family
Manufacturer: Intel Corporation
Chip type: Intel(R) 82915G/GV/910GL Express Chipset
DAC type: Internal
Device Key: Enum\PCI\VEN_8086&DEV_2582&SUBSYS_01C41028&REV_04
Display Memory: 128.0 MB
Current Mode: 1280 x 1024 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
so there it is my comp help me and one last thing is why when i use the jabo direct 3d (any version) in paper mario that when i go to toad town after the goomba king fight that the game starts the flicker and glitch a lot? help me with that to plz. oh yea i got a hyper threaded processor (2 prossesors or 2 cpus) just to make sure that might be the cause of these problems.