c2ironfist
GrandMaster SEXY
Things I'm looking to improve are:
- Options that help utlize mame Visuals
- Sound Quality
- High Frame rate
- Smoothness
- Sharp
- Colour
Hey guys
I'm using Mame 32 FX ver. 105 and I was wondering what are the best settings to chose to maximize sound and video?
I've read through the faq and I still am not sure or clear on what I could do to optimize
visuals.
Here is the faq I used to help guide me.
" http://www.mameworld.net/easyemu/mameguide/mame32setup.htm "
The settings in the " advance settings " I am not clear on, hopefully someone can help
example:
match game refresh rate, sync monitor refresh, wait for vertical sync, switch resolution to fit, switch color depth to fit.
here are my settings for default game properties
*********************************************
Display:
off Run in Windows
off Start out Maximized
on Enforce aspect ratio
on Throttle
Clean Stretch
auto
Rotation
default
Effects
off use scanlines
none
zoom
2
gamma correction
1.0
brightness correction
1.0
pause brightness
0.65
2 zoom
1 gamma correction
1 Britghtness Correction
0.65 Pause Brightness
*********************************************
Advanced:
yes Use DirectDraw
yes Tripple Buffering
no Match Game Refresh Rate ( turning this on, does it limit the amount of frames?)
yes Sync to monitor refresh ( read turning this on may higher framerate )
yes Wait for Vertical sync ( does turning this on make any difference? If so I'll leave it)
no Switch Resolution to fit ( does this enhance or limit visual quality? I notice when I have this turned on it does not look clear, sharp and colourful )
no Switch color depth to fit ( does this enhance or limit visual quality? I notice when I have it turned on it does not look as clear, sharp and colourful )
Resolution:
auto size
auto depth
auto refresh
1 Full screen brightness
yes stretch using hardwae
aspect ratio 4:3
fram skip
no automatic
draw every frame
**********************************************
Direct3D:
Default ( Anything I touch here causes the game to look bad with scnalines etc.)
**********************************************
Sound:
( I dont think there is anything more i can do for sound quality but maybe there is an extra plug in or something that may help?)
yes Enable sound and sound CPUs
yes Use Samples
yes Use Folume auto Adjustment
sample rate
48000
volume attenuation
0db
audio latency 1/5
************************************************
Well thanks for reading, I hope some one can shed some lite as to what would be the best settings or what I can do to optimize them
Thanks for posting
Jimmy
Currently Running
Compaq Presario V2000
AMD Turion ML-32 1.8ghz
ATI Radeon X200 integrated 128mb
Ram 1128mb
14" WXGVA High Definition LCD ( Wide Screen )
- Options that help utlize mame Visuals
- Sound Quality
- High Frame rate
- Smoothness
- Sharp
- Colour
Hey guys
I'm using Mame 32 FX ver. 105 and I was wondering what are the best settings to chose to maximize sound and video?
I've read through the faq and I still am not sure or clear on what I could do to optimize
visuals.
Here is the faq I used to help guide me.
" http://www.mameworld.net/easyemu/mameguide/mame32setup.htm "
The settings in the " advance settings " I am not clear on, hopefully someone can help
example:
match game refresh rate, sync monitor refresh, wait for vertical sync, switch resolution to fit, switch color depth to fit.
here are my settings for default game properties
*********************************************
Display:
off Run in Windows
off Start out Maximized
on Enforce aspect ratio
on Throttle
Clean Stretch
auto
Rotation
default
Effects
off use scanlines
none
zoom
2
gamma correction
1.0
brightness correction
1.0
pause brightness
0.65
2 zoom
1 gamma correction
1 Britghtness Correction
0.65 Pause Brightness
*********************************************
Advanced:
yes Use DirectDraw
yes Tripple Buffering
no Match Game Refresh Rate ( turning this on, does it limit the amount of frames?)
yes Sync to monitor refresh ( read turning this on may higher framerate )
yes Wait for Vertical sync ( does turning this on make any difference? If so I'll leave it)
no Switch Resolution to fit ( does this enhance or limit visual quality? I notice when I have this turned on it does not look clear, sharp and colourful )
no Switch color depth to fit ( does this enhance or limit visual quality? I notice when I have it turned on it does not look as clear, sharp and colourful )
Resolution:
auto size
auto depth
auto refresh
1 Full screen brightness
yes stretch using hardwae
aspect ratio 4:3
fram skip
no automatic
draw every frame
**********************************************
Direct3D:
Default ( Anything I touch here causes the game to look bad with scnalines etc.)
**********************************************
Sound:
( I dont think there is anything more i can do for sound quality but maybe there is an extra plug in or something that may help?)
yes Enable sound and sound CPUs
yes Use Samples
yes Use Folume auto Adjustment
sample rate
48000
volume attenuation
0db
audio latency 1/5
************************************************
Well thanks for reading, I hope some one can shed some lite as to what would be the best settings or what I can do to optimize them
Thanks for posting
Jimmy
Currently Running
Compaq Presario V2000
AMD Turion ML-32 1.8ghz
ATI Radeon X200 integrated 128mb
Ram 1128mb
14" WXGVA High Definition LCD ( Wide Screen )
Last edited: