Error in Cassini.

[y8i]

Hello.

I'm using Cassini v1.00, but when I click on Run CUE/BIN and select the .cue file it says "Error while try to fin *.BIN". I got a BIOS file (euro.bin) and the ISO I selected has two files (.bin and .cue), while Cassini only recornizes the .cue one.

Suggestions on how to fix this, anyone ?

[montpics]

The bios for Cassini should be EURO.BIN, as you mentioned earlier while *.bin and *.cue found as CD image file. Don't delete *.bin file. Instead, mount the image with *.cue by using Daemon-Tools.

[y8i]

Just did that. It says "Unable to mount image. File not accessible." Only shows the *.cue file.

EDIT: After I installed Deamon Tools, my harddrive E:\ is gone, know how to get it back ?

[montpics]

How about system restore? Weird as I'd never cross with that problem before after I personally install DT (not the latest one though).

Anyway, you can edit the name of the *.bin file by open the *.cue file using Notepad. Rename the *.bin with the exact name. (Hope you can get my meaning.)

[y8i]

The *.cue and the *.bin have exactly the same filename, so I guess that isn't the problem.

[montpics]

The *.cue and the *.bin have exactly the same filename, so I guess that isn't the problem.

Try to open the *.cue file with Notepad first and see if it's the same filename for *.bin. Better try than doing nothing, right?

[y8i]

Tried that. *.bin file couldn't be opened in Notepad due to file size (647.967 kB). Same thing for other text programs. As for *.cue it says this:

FILE "PDSAGA1.BIN" BINARY
TRACK 01 MODE1/2352
INDEX 01 00:00:00
TRACK 02 AUDIO
PREGAP 00:02:00
INDEX 01 60:59:23
TRACK 03 AUDIO
INDEX 00 61:07:60
INDEX 01 61:09:60

[Alexander_13]

make a new .cue file with sega cue maker and then mount it with daemon tools

[montpics]

Tried that. *.bin file couldn't be opened in Notepad due to file size (647.967 kB). Same thing for other text programs. As for *.cue it says this:

FILE "PDSAGA1.BIN" BINARY
TRACK 01 MODE1/2352
INDEX 01 00:00:00
TRACK 02 AUDIO
PREGAP 00:02:00
INDEX 01 60:59:23
TRACK 03 AUDIO
INDEX 00 61:07:60
INDEX 01 61:09:60

Then rename PDSAGA1.BIN to the exact name as the filename for the *.BIN in that *.cue file.

Example :
You find the filename for both '*.cue' and '*.bin' is '01.cue' and '01.bin'.

Then open the 01.cue with Notepad and you will find it is written as the same as the quote given above.

Rename the name 'PDSAGA1.BIN' to '01.BIN' and save. After that, mount the '01.cue' file with Daemon-Tools.

[y8i]

That did it. The emulation itself works fine now. But when I run the ISO I get the SEGA splashscreen (with sound) and after that a screen with 9 buttons and japanese characters. Can't really figure how I should get past this.