Tutorial: Sony Playstation 1 (PSX) Emulator Quick-Start Guide

R

Rezo

New member
Sony Playstation (PSX) Emulator Quick-Start Guide by: Rezo


Required Files:



Optional Files:


Instructions:


Create Folders:
  • Create a Folder and Name it PSX
  • Create a Folder in PSX and call it GAMES

Extract ePSXe v1.7.0:
  • Install WinRAR Archiver
  • Open epsxe170.zip
  • Click FILE -> SELECT ALL -> Click EXTRACT TO
  • Locate the /PSX/ Folder in the Middle-Right Box
  • Click OK


Extract ZLIB1:
  • Open zlib125-dll.zip
  • Click FILE -> SELECT ALL -> Click EXTRACT TO
  • Locate the /PSX/ Folder in the Middle-Right Box
  • Click OK



Add PSX PLUGINS and BIOS Files:


PLUGINS FOR WINDOWS:
  • Open gpupeteogl209.zip
  • Click FILE -> SELECT ALL -> Click EXTRACT TO
  • Locate the /PSX/PLUGINS Folder in the Middle-Right Box
  • Click OK

  • Open gpupeopssoftwin118b.zip
  • Click FILE -> SELECT ALL -> Click EXTRACT TO
  • Locate the /PSX/PLUGINS Folder in the Middle-Right Box
  • Click OK

*Make sure you Verify that: gpuPeopsSoft, gpu, and gpuPeteOpenGL2 are in the /PSX/PLUGINS/ Folder*


PLUGINS FOR LINUX:

ePSXe Plugins for Linux can be found at: LINK


BIOS FILE:
  • Locate BIOS File or Several BIOS Files (example SCPH7502.bin)
  • Paste BIOS to your /PSX/BIOS Folder


OPENING ePSXe v1.7.0:

Windows Vista and Windows 7:
  • Open the /PSX/ Folder
  • Locate the ePSXe File with the GamePad icon (to the right under "TYPE" it should say Application)
  • Right Click -> PROPERTIES -> COMPATABILITY -> PRIVILEGE LEVEL
  • Put a Check in the RUN THIS PROGRAM AS AN ADMINISTRATOR Box -> Click APPLY -> Click OK
  • Double Click the ePSXe File -> Click YES (if Asked)

Windows XP:
  • Open the /PSX/ Folder
  • Double Click ePSXe.exe


RUNNING A GAME:

**Optional** Use IMGBURN to make an ISO File of an Original PSX Game
  • Put Game ISO in /ePSXe/GAMES/
  • Open /PSX/ and Double Click ePSXe
  • Click Yes (if asked)
  • Click FILE -> RUN ISO
  • Locate /PSX/GAMES/ Folder
  • Double Click Game ISO to Select the Game


ADDITIONAL OPTIONS:
**NOTE: ePSXe MUST BE RUNNING AS ADMINISTRATOR**

Configure a Gamepad/Controller
  • Acquire a USB Gamepad (an XBOX360 Gamepad WILL WORK)
  • Plug USB Cable into your Computer
  • Allow Windows to Install Drivers (automatic)
  • Open /PSX/ Folder and Double Click ePSXe
  • Click CONFIG -> GAMEPAD -> PORT 1 -> PAD 1

    **NOTE: If it does not show up, either you are not running ePSXe in Administrator mode,
    your controller is faulty, or you should check other combinations (Port 2, etc)
 
D

digihax

New member
Thnx bro, but where can I find a program to use my ps2 or 3 controller?, is that possible maybe?. Well, I'm sure it is since you said a x-box 360 controller will work but where do I find a sixaxis program at I wonder?...
 
You must log in or register to reply here.
Top