Results 1 to 5 of 5

Thread: Emulator for PSP, chip/flash needed?

  1. #1
    The New Kid
    Join Date
    Jul 2009
    Posts
    1

    Default Emulator for PSP, chip/flash needed?

    Hey there!
    So I'm thinking about getting a PSP pretty soon, and I was wonderng if you need to chip/flash it to play emulators?

  2. #2
    The New Kid
    Join Date
    Sep 2009
    Posts
    3

    Default Re: Emulator for PSP, chip/flash needed?

    I dont have a psp either. But i think you just need a pandoras battery so you can do the exploit for custom firmware, then everything is eboots and on your mem stick . i believe.

  3. #3
    Windows 10 cibomatto2002's Avatar
    Join Date
    May 2005
    Location
    Nashville,Tennessee
    Age
    45
    Posts
    1,364

    Default Re: Emulator for PSP, chip/flash needed?

    It's not that easy anymore any new PSP you get will be PSP 3000 or above.

    This is how people hack the PSP 300.

    Here’s a quick run down of what we’re doing to need to get ChickHEN:
    A PSP-3000 or PSP-2000 with firmware 5.03 (This is imperative, you won’t get ChickHEN to ever load with out it!)
    The lastest ChickHEN release.
    And a lot of patience

    Firstly make sure your PSP-3000 or TA88v3 PSP-2000 has PSP Firmware 5.03 installed. Check in your PSP XMB go to Settings/ System Settings / System infomation. If you don’t have PSP 5.03 installed download it here. Create a folder called UPDATE in PSP/GAME on your memory stick and place the eboot from the archive into the folder. Run the 5.03 Firmware update from GAME / Memory stick and you will have 5.03. The firmware required to run ChickHEN.

    Now download the ChickHEN R2 release from here. Open the CHickHEN R2 archive and place the folder inside Slim with gif images into your PSP memory stick location like so PSP/PHOTO (later it will be PSP/PHOTO/ChickHEN). Now place the h.bin into the root of your memory stick pro duo. Where the folders PSP, MUSIC etc are located.

    Ok next step place the memory stick into the PSP. We have found this step helps ChickHEN boot with less attempts, go your PSP XMB, to settings and Restore Default Settings. Your PSP will reset, now go back into settings and turn off UMD Auto-Start and UMD Cache. We found ChickHEN loads in 2-3 goes after doing this.

    Now go into Photo / Memory Stick and ChickHEN. And wait, you will see five egg giff images, these will start to load thumbnails. Your PSP may freeze and reset. Just keep retrying and ChickHEN R2 will load up….But if you see flashing colors, your PSP will reboot into ChickHEN your homebrew ready!

    With ChickHEN R2 loaded now starts the fun part. (P.S You can put your PSP into standby now so you don’t have to go through the whole process again)

    http://pspslimhacks.com/guide-to-chi...p-3000-ta88v3/

  4. #4
    The New Kid NickBogard's Avatar
    Join Date
    Nov 2009
    Location
    Seattle
    Posts
    5

    Default Re: Emulator for PSP, chip/flash needed?

    Wouldn't it be easiest to just get a PSP fat model and a Pandora battery? Or is the fat hardware inferior enough to merit the extra effort needed to get the newer slim models to work?

  5. #5
    Windows 10 cibomatto2002's Avatar
    Join Date
    May 2005
    Location
    Nashville,Tennessee
    Age
    45
    Posts
    1,364

    Default Re: Emulator for PSP, chip/flash needed?

    The slim has more memory anyway to play SNES most game are slow on it some are not.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •