PSX+N64 USB Converter Problems

[poirot84]

I just purchased a PSX+N64 USB Converter from EBAY from this link:

http://http://cgi.ebay.com/ws/eBayIS...lenotsupported

However, I have no idea of how to install in my computer after inserting the CD. Can anyone help me out?

[ulaoulao]

did it look like this?



I'm guessing it did, if so its a HID ( human interface devise ) it requires no drivers. Plug it in and your HID device should show up, look in device manager ) Windows.. If you have a mac, same applies expect the device manager.

[poirot84]

Do you mean in the front of the computer? This is where I put my flash drive in. Well, either way, nothing is happening. What now?

[ulaoulao]

Do you mean in the front of the computer? This is where I put my flash drive in. Well, either way, nothing is happening. What now?

LOL, what? Seriously you know what a usb device is right?

nothing is happening

- If anything happens its only once. Go to control panel and then in to game controllers. Once open you should see a generic device in there. Double click on that and see if the controller works. Calibrate it!!


For the most part. This device is only going to fit in one spot, yes somtimes its in the front of the computer. For testing usb's its a good idea to try another port. Look in the back and see if that works.

[poirot84]

Ok, I checked out the Game Controllers after I insert the PSX+N64 USB Converter and it's called "4 axis 16 button joystick". I calibrate it like you say and still nothing has changed. I'm still stuck so what do I do now?

[ulaoulao]

What do you expect to change? Its working, your done play your game??

IF you need help setting up your emulator with the gamepad then state the emulator.

[poirot84]

I'm using project64 1.6.

[ulaoulao]

Did you pick a plug in? Did you select the "4 axis 16 button joystick" in the list above, did you assign buttons?

[poirot84]

I didn't see the "4 axis 16 button joystick" because it wasn't there. Am I suppose to download it from the CD?

[ulaoulao]

If you are suing the plugins correctly its show a mapping of whats in your system. Since you already saw it in widows, it should be available. What input plugin are you using? Have your tried others?