Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: No$GBA 2.4d Released!

  1. #1
    Forum Administrator Lefteris_D's Avatar
    Join Date
    Sep 2003
    Location
    Athens, Greece
    Age
    38
    Posts
    3,856

    Default No$GBA 2.4d Released!

    A new version of NO$GBA is now available. Here are the changes:
    - debug/setup: allows to enable/disable user-debugmsg, wifi-log, and 3d-log
    - cpu: emulates undef opcode/copro exception (with warning if no bios/vector=0)
    - wifi/emu: emulates new bits in rx header, and optional auto sequence control
    - cpu/bugfix: arm ldm/stm accidently destroyed mis-alignments (on writeback)
    - wifi/help: added info on port 1C4h, and on some of the 1Bxh ports (rxstat's)
    - wifi/help: added new chapter on transmit errors and automatic ACK responses
    - wifi/help: added info on ports 1A8h,1AAh,1ACh,1AEh (bit0..12 vs. 1B0h..1BFh)
    - wifi/help: discovered new bits in RX header, added notes on MAC addresses
    - wifi/debug: allows to log all packets (with automatic comments on ieee header)
    - wifi/help: added notes on automatic sequence ctrl and auto-modified frame ctrl
    - wifi/emu: tx-engine uses new timers, and emulates length/rate/preamble timing
    - wifi/emu: emulates the various wifi counters and irqs at correct timing
    - debug/setup: memorizes if iomap window was open (if so, re-opens it on boot)
    - debug/emustop: break_requests (esc-key) take place only on current machine
    - debug/internal: replaced ds:bibos swi_retadr/haltstop/intrwait by vals:bios
    - debug/vramviewer: oam viewer supports extended obj palettes (thanks pierre)
    - debug/vramviewer: fixed engine-B palette viewer (thanks pierre for bug report)
    - dslite/help: added info on new TSC chip by AKM (new IN2, different PD bits)
    - dslite/help: added note on near-crt-quality colors and wider viewing angles
    - dslite/help: added custom change-channels-flowchart for new wifi-type3-chips
    - dslite/help: added settings at firmware[0CEh-and-up] for new wifi-type3-chips
    - dslite/xboo: updated nds-pins.gif (added new pin-positions on ds-lite board)
    - dslite/xboo: added 8 extra diodes in data lines (to prevent power-on problem)
    - dslite/help: added lite-specific wifi (W) mirrors, and unused wifi ram/ports
    - dslite/help: added the new backlight level bits in firmware user settings
    - dslite/help: added caution on DS-lite destroying wifi ports 064h and 076h
    - dslite/help: added new powerman backlight/power register (and lost mute-bit)
    - dslite/help: added ID for firmare chip 35PE20P (and supported it in ds-xboo)
    - powerman/help: added unknown bit (mutes volume to zero, if amplifier is on)
    - wifi/emu: emulates initial wifi-port settings and random register (mod 5FDh)
    - wifi/emu: emulates primary wifi irq flag stuck zero while secondary nonzero
    - wifi/emu: emulates corrected ports (004h,0ACh,0AEh,0B0h,0B4h)
    - wifi/emu: emulates new ports (210h, 05Ch/06Ch, 062h/064h) and new mirrors
    - wifi/help: added rx/tx signal/timing charts (rfu pins, aka 19Ch bits)
    - wifi/help: added specs/cautions on primary wifi irq flag (2000214h.Bit24)
    - wifi/help: added new mirrors (on read from 0ACh,0AEh,20Ch,21Ch,298h,2A8h,2B0h)
    - wifi/help: added notes/info on ports 038h,19Ch,214h,21Ch and on W_CONFIG_140h
    - wifi/help: new bits 0EAh.1,008h.13/14 004h.14); extra-TX ports 118h,0EEh,090h
    - wifi/help: corrected ports 004h,0ACh,0AEh,0B0h,0B4h and txstat.bit12-13
    - wifi/help: added info on new ports (110h, 210h, 05Ch/06Ch, 062h/064h)
    - wifi/help: fixed tx_hdr: rate 8bit (not 16bit) defaults to 1Mbit/s if invalid
    - wifi/help: added new bits: port004h.bit0 tx_master, 008h.bit15 beacon_irq1
    - wifi/help: major updates in timers chapter (reloads, IRQ13/14/15, 22MHz, etc)
    - nds/help: pinouts for nds LCD sockets, wifi RFU boards, and powerman chips
    - gui: mousewheel support (win98 or dos/ctmouse) (thanks jasper/idea, tilo/hw)
    You can get it from here.
    ...

  2. #2
    The New Kid
    Join Date
    Aug 2007
    Posts
    5

    Default Re: No$GBA 2.4d Released!

    If it has wifi then why when i go to mario cart it says there is no wifi and then when i go back it freezes!

  3. #3
    Off The Scale azoreseuropa's Avatar
    Join Date
    Nov 2006
    Posts
    2,907

    Default Re: No$GBA 2.4d Released!

    Quote Originally Posted by Axis_12 View Post
    If it has wifi then why when i go to mario cart it says there is no wifi and then when i go back it freezes!
    Read his site again. It is not fully emulate.
    MacBook Pro 13" with a Retina October 2014 (Purchased on March 28, 2015) - macOS Sierra (10.12.1)

    iPhone 6+ - iOS 10.1.1


    EMU: SDL MAME - SNES9X - FCEUX - Gens32 - No$gba - DeSmuME - ePSXe - SSF - NeoPop - OSwan - Mupen64Plus - PCSX2 - Dolphin

  4. #4

    Default Re: No$GBA 2.4d Released!

    Just out of curiosity, is it necessary to update the firmware file if I'm going from no$gba v2.4a to v2.4d?

  5. #5
    Off The Scale azoreseuropa's Avatar
    Join Date
    Nov 2006
    Posts
    2,907

    Default Re: No$GBA 2.4d Released!

    No. It didnt have anything to do with emulator's effective at all.
    MacBook Pro 13" with a Retina October 2014 (Purchased on March 28, 2015) - macOS Sierra (10.12.1)

    iPhone 6+ - iOS 10.1.1


    EMU: SDL MAME - SNES9X - FCEUX - Gens32 - No$gba - DeSmuME - ePSXe - SSF - NeoPop - OSwan - Mupen64Plus - PCSX2 - Dolphin

  6. #6

    Default Re: No$GBA 2.4d Released!

    When will it get rotation? I can't play Brain Age 2.

  7. #7
    Off The Scale azoreseuropa's Avatar
    Join Date
    Nov 2006
    Posts
    2,907

    Default Re: No$GBA 2.4d Released!

    Quote Originally Posted by MasterOfHyrule View Post
    When will it get rotation? I can't play Brain Age 2.
    Do you want no$gba developer to cancel the emulator ? Then don't ask! He will when he decide to add it one day. That's very important not to ask When. They hate that!
    MacBook Pro 13" with a Retina October 2014 (Purchased on March 28, 2015) - macOS Sierra (10.12.1)

    iPhone 6+ - iOS 10.1.1


    EMU: SDL MAME - SNES9X - FCEUX - Gens32 - No$gba - DeSmuME - ePSXe - SSF - NeoPop - OSwan - Mupen64Plus - PCSX2 - Dolphin

  8. #8
    The New Kid
    Join Date
    Oct 2007
    Posts
    1

    Default Re: No$GBA 2.4d Released!

    Do You know when the nocash will be able to use wi-fi?

  9. #9
    Off The Scale azoreseuropa's Avatar
    Join Date
    Nov 2006
    Posts
    2,907

    Default Re: No$GBA 2.4d Released!

    Quote Originally Posted by natu133 View Post
    Do You know when the nocash will be able to use wi-fi?
    STOP ASK WHEN!!!!!

    The developer will read it from you and cancel this emulator. Do not ask WHEN! Period. Be patient! Go buy NDS if you are not patient.
    MacBook Pro 13" with a Retina October 2014 (Purchased on March 28, 2015) - macOS Sierra (10.12.1)

    iPhone 6+ - iOS 10.1.1


    EMU: SDL MAME - SNES9X - FCEUX - Gens32 - No$gba - DeSmuME - ePSXe - SSF - NeoPop - OSwan - Mupen64Plus - PCSX2 - Dolphin

  10. #10
    FFVII AerisHeaven's Avatar
    Join Date
    Nov 2007
    Location
    SquareEnix
    Posts
    31

    Default Re: No$GBA 2.4d Released!

    Man, I hope they finally finish the FPS problems one day. NoGBA is the best

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •