[UPDATED!] - Nintendo 64 : How to emulate Transfer Pak (For Pokemon Stadium 1 & 2)

Printable View

Show 40 post(s) from this thread on one page

February 19th, 2005, 18:06
Jale

[UPDATED!] - Nintendo 64 : How to emulate Transfer Pak (For Pokemon Stadium 1 & 2)
IMPORTANT NOTES BEFORE READING

It's been 6 years since I wrote this guide and due to popular demand, it's time for an update.
- Get version 1.82a, since the latest version (1.83) won't load the savegame correctly or it's somehow broken. Simply, IT WON'T WORK, saying "Saved file not found".
- This method works with both Pokemon Stadium and Pokemon Stadium 2.
- N-Rage's DirectInput plugin requires DirectX 8 or later to work. It is always important to have the latest DirectX version installed in your system.
- THE GAME BOY TOWER DOES NOT WORK! PERIOD!!!
- This method has been tested in both Project64 1.6 and 1.7 and with different regional Pokemon Stadium ROMs (mainly U and E ROMs). They were also tested running on Microsoft Windows 7 Ultimate 64-bit operative system
http://i53.tinypic.com/2wd2909.jpg http://i52.tinypic.com/2dgmgwl.jpg

HOW TO...

It is very simple. First, get N-Rage's plugin from >> HERE << (Remember, we want 1.82a).

Step 1 - Selecting the plugin that supports Transfer Pak.
- In Project64, go to Options --> Settings (or simply press Ctrl + T).
- Now select the N-Rage`s Direct-Input8 V2 1.82a plugin. It's the best one that supports Transfer Pak.
http://i53.tinypic.com/2rg2fk6.gif

Step 2 - Configuring The Controller Plugin.
- Go to Options --> Configure Controller Plugin.
- Select Controller Pak tab.
- Select Transfer Pak from the drop down menu and select the GBC and SAV files in the two last fields and click Save. Make sure RawData is enabled as well.
- Run Pokemon Stadium 1 & 2 and play with your well trained Pokemon from the Game Boy games.
http://i54.tinypic.com/73hy5x.gif

http://i52.tinypic.com/2dgmgwl.jpg http://i55.tinypic.com/s403z8.jpg
http://i53.tinypic.com/2lvyd08.jpg http://i52.tinypic.com/hx6bmq.jpg

Last updated: 03/09/2011.
February 20th, 2005, 10:42
montpics

Good job, made it as a stickied thread. ;)
February 22nd, 2005, 11:23
waqararif11

so playin in the gb tower is still impossible right?
February 22nd, 2005, 13:53
Jale

It is said that the N-Rage´s plugin won't let you play the GB tower, but I am not really sure.
February 22nd, 2005, 13:54
waqararif11

so its not possible to go in the gb tower with and tranfer pack plugin compatible grafix card?
February 22nd, 2005, 13:57
Jale

Graphics card? :confused:
February 22nd, 2005, 14:25
waqararif11

sorry i meen plugin
February 22nd, 2005, 14:40
Jale

I don't know why it doesn't work. I'll do a small research tomorrow...
February 28th, 2005, 21:43
exodus

uhm ... why the hell won't it work with my pokemon yellow??? :confused: (i've got an english version)

and btw - is there any way i could make it work with german versions? coz i've tried loading german pokemon gameboy games on both english and german pokemon stadiums, none worked ... but the funny thing is that english GB games loaded on german stadiums :confused:
March 1st, 2005, 00:36
Jale

Strange, It works with English and even Spanish version of Pokémon Yellow...
March 2nd, 2005, 02:15
Milkrosoft

When I click the "controller pak" tab, the transfer pack is not appearing in the drop down list, just the memory pak and rumble pak. Does anybody know why or how to solve that problem?
---EDIT---
I fixed the problem. I needed the updated plugin.
March 11th, 2005, 11:49
coldboyqn

How can I get gb or sav file to use for emulating...?
March 11th, 2005, 14:31
Jale

Hey, don't triple post!

OK, you don't need the "gb" file, but the "gbc" one. "gbc" files are Gameboy Color ROMs; specially you need the Pokémon ROMs. The "sav" file is the Gameboy save file, needed to load Pokémon to the N64.

To look for the "gbc" files (ROMs) use a search engine like Google, because ROMs requesting are not allowed here.

And of course, you need a GBC or GBA emulator to play the "gbc" files and hunt some Pokémon before battling in Pokémon Stadium ;)
March 15th, 2005, 10:16
coldboyqn

what about gba file?

I only have gba file...
Can I use it instead?
March 15th, 2005, 14:59
Jale

It's no use. You need to play GBA Pokémon first and catch some Pokémon. Train then and later, put them to fignt on Pokémon Stadium.

When you save in GBA Pokémon, the "sav" file will be created.
April 6th, 2005, 00:58
Gigashock

any questions from transfer pak or even about the plugin, you should check this thread from Emutalk. Rewriting N-Rage DirectInput8 Transfer Pak
August 22nd, 2005, 17:01
sonknuck23

Still wont work for me!

Hey. I just registered to try and fix this problem. Even when I load both the Save File, and the rom, it says "Save file does not exist" in the game. How can I fix this?

Actually, it's only Yellow version that wont work. But that's the version I want to play.
August 23rd, 2005, 13:12
hagbard

Which emulator are you using? Perhaps your Rom it's corrupted
September 15th, 2005, 13:36
Gigashock

are you sure it's the correct save and that you have saved correctly on your gb emu? try using vba opening the rom and then file > import > battery file and select your save file and see if your save is there.
September 25th, 2005, 22:27
omnislazher

??

Quote:

Originally Posted by Milkrosoft

When I click the "controller pak" tab, the transfer pack is not appearing in the drop down list, just the memory pak and rumble pak. Does anybody know why or how to solve that problem?
---EDIT---
I fixed the problem. I needed the updated plugin.

where did u get that updated plug in u were talking about?
September 27th, 2005, 18:52
Gigashock

i guess he was talking about a version of the plugin released previously than the one we've been talking about and the latest released many time ago cause i don't think there is a new version.
September 27th, 2005, 19:23
Jale

The one that comes with Project64 is enough.
September 27th, 2005, 23:49
omnislazher

??

i do have project64 but the transfer pak isnt showing up what do i need or need to do?
October 14th, 2005, 20:53
Ario

Re: Nintendo 64 : How to emulate Transfer Pak (For Pokémon Stadium 1 & 2)

I could use this in the same way for mario tennis couldnt I?
October 14th, 2005, 23:31
Hybrid_XYZ

Re: Nintendo 64 : How to emulate Transfer Pak (For Pokémon Stadium 1 & 2)

UH when i got to that part where i pick transfer pack i dont see it anywhere what should i do to update this??
October 14th, 2005, 23:54
Jale

Re: Nintendo 64 : How to emulate Transfer Pak (For Pokémon Stadium 1 & 2)

Did you click on the "Controller Pak" tab?

http://img104.exs.cx/img104/6204/step44fa.jpg
October 16th, 2005, 00:32
Hybrid_XYZ

Re: Nintendo 64 : How to emulate Transfer Pak (For Pokémon Stadium 1 & 2)

ya but when i got to the part where its like rumble pack w/e it wasent there :(
October 16th, 2005, 02:47
Jale

Re: Nintendo 64 : How to emulate Transfer Pak (For Pokémon Stadium 1 & 2)

I think you should get the latest version from NGEmu.com.
October 17th, 2005, 22:48
Hybrid_XYZ

Re: Nintendo 64 : How to emulate Transfer Pak (For Pokémon Stadium 1 & 2)

k thnx :)
October 18th, 2005, 02:25
sobernuts

Re: Nintendo 64 : How to emulate Transfer Pak (For Pokémon Stadium 1 & 2)

Uhh it clearly says PROJECT 64 emulator. roflnub.
October 18th, 2005, 03:40
ticktock

Re: Nintendo 64 : How to emulate Transfer Pak (For Pokémon Stadium 1 & 2)

Quote:

Originally Posted by sobernuts

Uhh it clearly says PROJECT 64 emulator. roflnub.

Hey, look everybody its a troll.
October 18th, 2005, 04:28
Jale

Re: Nintendo 64 : How to emulate Transfer Pak (For Pokémon Stadium 1 & 2)

Quote:

Originally Posted by sobernuts

Uhh it clearly says PROJECT 64 emulator. roflnub.

...

I haven't tried it, but I think it works in any emulator that supports this plugin.
October 19th, 2005, 22:18
omnislazher

Re: Nintendo 64 : How to emulate Transfer Pak (For Pokémon Stadium 1 & 2)

Quote:

Originally Posted by Butters

I think you should get the latest version from NGEmu.com.

how do i use this plug in?
October 19th, 2005, 22:26
Jale

Re: Nintendo 64 : How to emulate Transfer Pak (For Pokémon Stadium 1 & 2)

Go to your emulator options and search for the controller plugins, then change to N-Rage´s plugin and follow the steps on the first page.
October 19th, 2005, 22:33
omnislazher

Re: Nintendo 64 : How to emulate Transfer Pak (For Pokémon Stadium 1 & 2)

Quote:

Originally Posted by Butters

Go to your emulator options and search for the controller plugins, then change to N-Rage´s plugin and follow the steps on the first page.

i still dont know what to do after i download the file mine is only 1.80 and in ur pics it says 1.82a??where do i send the plug-in i download??? do i have to save the plugin in somewhere special???
October 19th, 2005, 22:53
Jale

Re: Nintendo 64 : How to emulate Transfer Pak (For Pokémon Stadium 1 & 2)

You can get the latest plugin version from NGEmu.com and the plugins should be in the plugin directory of your emulator.
October 19th, 2005, 22:58
omnislazher

Re: Nintendo 64 : How to emulate Transfer Pak (For Pokémon Stadium 1 & 2)

where do i save it too?
October 20th, 2005, 02:28
Jale

Re: Nintendo 64 : How to emulate Transfer Pak (For Pokémon Stadium 1 & 2)

...

In the plugins folder. Go to your emulator's folder and go to plugins and paste it there.
October 20th, 2005, 13:45
montpics

Re: Nintendo 64 : How to emulate Transfer Pak (For Pokémon Stadium 1 & 2)

Quote:

Originally Posted by omnislazher

where do i save it too?

Noob question...... Guess it's about time to test on other emulators. :cool:
October 20th, 2005, 22:05
omnislazher

Re: Nintendo 64 : How to emulate Transfer Pak (For Pokémon Stadium 1 & 2)

pm me how???? all i have is the porject64 icon

Show 40 post(s) from this thread on one page