Log in

View Full Version : no$gba 2.4b released



FFX~Valefor
June 6th, 2007, 10:14
here are the news


05 June 2007 - version 2.4b

- ereader/demo's: uploaded ereader.zip (with magicflr, rotris, camera, bombswp)
- nds/sound: bugfix: fixed snd crash on mul1.5 speed (thanks Giuseppe Marletta)
- bios-clone: bugfix: gba/nds intrwait set IME=1 (eg. japanese/original ereader)
- ereader/a22i: vpk compression, good tree values, auto-method1/0 for gba/nes
- ereader/emu: automatically loads next strip, automatically extracts red-layer
- ereader/emu: supports homebrew 300dpi .bmp's and scanned 1200dpi .jpg's
- ereader/emu: emulates ereader hardware (requires ereader bios/bmp/jpg files)
- ereader/a22i: new .ereader and .title directive, handles .import'ed .nes roms
- ereader/help: added verify/create error correction (thanks Simon Rockliff)
- ereader/help: added dotcode, data, program, vpk chapters (thanks Damien Good)
- ereader/help: rev'ed PGA I/O ports, camera SIO ports, address bar encryption
- debug: shows "BiosSwi/IrqHandler" labels also for ARM9 (with offset FFFF0000h)
- bios/help: corrected bios-swi huffman description and added an example to it
- bios: improved bios-swi huffman decoder (straighter, smaller, and faster)
- xed: fixed occasional crashes on ctrl,k+n (missing reform in toggle_blocktype)
- wifi: emulates microsecond counter read/change/start/stop
- wifi: emulates data transfer from local txbuf to rxbuf of remote console(s)
- wifi/help: added chapters on the various ieee802.11b frame (=packet) formats
- wifi/help: added notes on multiboot beacons (and multicart/pictochat beacons)
- wifi/help: added notes on transfer completion flags in txbuf_loc registers
- wifi/help: added new values in hardware headers chapter, added unknown chapter
- wifi/help: added a lot of new bits and registers in transmit control chapter
- wifi/help: marked all "unused" registers as w_internal (=not used by firmware)
- wifi: emulates ie/if registers, emulates pending powerforce with powerack
- wifi/debug: displays wifi registers (and current channel) in I/O map window
- wifi/help: added chapters on ieee802.11 frames, renamed rxbuf/txbuf registers
- wifi: fixed rf write, emulates powerforce=8001h (over the hedge)

http://nocash.emubase.de/gba.htm


********edit**********
i didnt see there was already a thread for it here: http://forums.emulator-zone.com/showthread.php?t=9807

barkhad
June 6th, 2007, 21:54
+------------------------------------------------------------------------------+
| Setting | Description |
+------------------------------------------------------------------------------+
| SSID | This is the name of the WiFi network you |
| | want to connect to. |
|------------------------------------------------------------------------------|
| WEP Key | Enter the WEP key here, if WEP is enabled. |
|------------------------------------------------------------------------------|
| Auto-obtain IP Address | This gives you the option to disable or |
| | enable DHCP. |
|------------------------------------------------------------------------------|
| IP Address | This allows you to manually assign an IP |
| | address for the DS to use. |
|------------------------------------------------------------------------------|
| Subnet Mask | This allows you to manually assign the |
| | subnet mask for the DS to use. |
|------------------------------------------------------------------------------|
| Gateway | This is the IP for whatever router you are |
| | using to connect out to the internet. |
|------------------------------------------------------------------------------|
| Primary DNS | These options allow you to assign |
| Secondary DNS | primary and backup DNS servers. |
+------------------------------------------------------------------------------+

barkhad
June 6th, 2007, 21:55
get some ideas for 2.4c

azoreseuropa
June 6th, 2007, 22:09
why some idea?

For Wifi: Someone got email from no$gba author:


[...]as Martin himself said, even though the emu can now send and receive packets, games do not link at all, no matter what you try.

:)