icez
March 4th, 2009, 05:38
Hey, I've been repairing and working with real arcade hardware (mvs / neogeo mostly).
I realized that some some roms would not work properly on the real hardware when burnt onto eproms (only the samples V roms)
Have some Neogeo roms been pre-patched after being dumped ?
Im also having trouble dumping some roms, especially 32mbit roms that my programmer is reading wrongly, one line out of too is blank in the buffer (when read as a 27c322 or any other 32mbit device).
Is there any trick there ? the pinout of the toshiba mask roms used is the same as the 27c322)
I hoep someone know about this, I'm sure it could help quite a few people.
I realized that some some roms would not work properly on the real hardware when burnt onto eproms (only the samples V roms)
Have some Neogeo roms been pre-patched after being dumped ?
Im also having trouble dumping some roms, especially 32mbit roms that my programmer is reading wrongly, one line out of too is blank in the buffer (when read as a 27c322 or any other 32mbit device).
Is there any trick there ? the pinout of the toshiba mask roms used is the same as the 27c322)
I hoep someone know about this, I'm sure it could help quite a few people.