General ePSXe Setup and Configuration

[Chronoless]

OK I got it to work, thanks very much :)...but I can't seem to get the memory card on the emulator to work, in the game when I save it tells me "Failed to save data". I try deleting the memory cards I made and make new ones with "epsxecutor", formatted them then put them into the designated slots, 1 for the first and 2 for the second, but I still get the error :S...Iono what to do...:(

[KillTheLightsxx]

Alright. GG your guide is a major help. But I just have one problem

When I get to step 7, I do double click the "ePSXe.exe" file. And the following comes up: "This application has failed to start because burutter.dll was not found. Re-installing the application may fix this problem" when I check it in WinZip, though, I can SEE the burutter.dll file. about 2 spaces up from the ePSXe.exe file. so what's the deal?

I have Re-installed it. I delete everything I downloaded from this guide off my computer completely, did the guide all over again, and still got only to step 7.

help would be appriciated =]

[Dizzle]

Hey guys!
Great thread but the problem i'm having is that when I try and run an iso it says that there is 'no WGL extention' and it closes down?? I think i've done everything correctly.
Thanks

[montpics]

You don't have a better graphic card that support T'n'L. Please try other plugins like P.E.Op.S plugin for GPU. :)

[SuperShadowRyan]

Yeah, I've tried everything, tutorial videos, all the plugins mentioned, I configured it properly, and all I get when I load an iso is:



*error loading [plugins\T3KOcpka.dll]
I have never seen that file, ever. Here is a screenshot:


http://i237.photobucket.com/albums/ff276/SuperShadowRyan/HELPPSXE.png


Grr... I partially think it's because I run Windows Vista... But I don't know for sure... worked on my other computer... WhyTF does this always happen to me with emulators for fifth generation consoles?!?

EDIT: well, apperantly, I had to go and select Disabled Netplay for my netplay plugin since it was blank. Never mind.

[azoreseuropa]

use the google and search for TK30cpka.dll and put it into the plugin and try again.

[Maximus]

I Have got it to work except I have a few problems, im not getting any sound out of it do I need a new driver for this?
Also I set the keyboard up as a controller and it doesnt seem to be working, do I need an actual controller for it or can I use a keyboard/xbox 360 controller.
Cheers and without the guide I wouldnt have been able to do it!

[Maximus]

I have the sound working but when I try and play games, trying driver 2 ripped from a CD, it plays the intro and shows the loading screen and then when its fully loaded all I get is a blank screen.
Cheers

[Hjustin2]

----------------------------------------------
General Epsxe Setup and Configuration:
----------------------------------------------

1) First you will need to make sure you have the latest copy of epsxe. As of today - August 1, 2004 - the most recent version is 1.6.0. If you do not have this release you can download it here...

| ePSXe (http://www.emulator-zone.com/doc.php/psx/epsxe.html) |

2) Once the file is finished downloading double-click it's icon. The file should automatically open in an archiving program such as Winzip or WinRAR. If you don't have such a program you can download one from either of these locations...

| Winzip (http://www.winzip.com/downwz.htm) |
| WinRAR (http://www.rarlab.com/download.htm) |

Keep in mind both of the previous downloads are evaluation copies or "trial versions"

Once you open the epsxe zip file choose to extract all of it's contents to the following path (this can be done by manual navigation to that location or by typing out the path name):

DRIVE:/Program Files/epsxe (Replacing "DRIVE" with your hard drive's letter)

3) Retrieve a Playstation BIOS file from elsewhere on the internet. It is considered in most countries to be illegal to be in possession of such a file so we cannot post links to it here. The file you will need can have two names --- one for NTSC (North American) games and one for PAL (European) games. Most likely - you will need the NTSC file. They are titled as follows:

- NTSC - SCPH1001.BIN
- PAL - SCPH7502.BIN

4) Once you have successfully download the correct BIOS for your region, extract it or place it in the following folder (assuming you used the suggested installation directory for epsxe as stated above)

DRIVE:/Program Files/epsxe/bios ("DRIVE" being you hard drive letter)

5) Next you will need to download some plugins for epsxe. Mainly you will need GPU (graphics proccessing unit) and SPU (sound proccessing unit) plugins. These are simply recommendations based on which plugins "normally" achieve optimum performance in most PCs. Download the following files.

GPU Plugins:
| Pete's OpenGL GPU (http://www.emulator-zone.com/doc.php/psx/psxplugins-tools.html) |
| Pete's OpenGL2 PSX GPU (http://www.emulator-zone.com/doc.php/psx/psxplugins-tools.html) |

SPU Plugins:
| Eternal SPU 1.41 (http://www.emulator-zone.com/doc.php/psx/psxplugins-tools.html) |

6) Once you have download all of the previous files (which will open in Winzip or WinRAR) extract all of their contents to the following directory:

DRIVE:/Program Files/epsxe/plugins (Provided you used the suggested path)

7) Once you have done all of this it's time to start epsxe for the first time. Go to the directory you installed epsxe too and double click the icon titled 'ePSXe.exe'. The program should start shortly.

8) You should be greeted with a popup box titled 'Welcome to the ePSXe config setup'. This is a "wizard" to get you started. If you've already run epsxe for the first time and want to access the wizard again click 'CONFIG > WIZARD GUIDE'. If you feel like reading then read what it says - otherwise click "CONIFG >>>" on the bottom right hand corner.

You will first be prompted for the BIOS configuration. Provided you have downloaded the correct BIOS and placed it in the proper folder you should see it listed in the white box. Make sure it is highlighted/selected and click "NEXT >>>"

Next comes the GPU configuration. In the white box will be a list of all the plugins you have for graphics. I suggest using Pete's OpenGL driver but depending on your PC specs - it may be trial and error until you find a plugin which produces desirable results. Once you have selected one click "NEXT >>>"

Here you will need to select the 'Eternal SPU Plugin 1.41' from the white box. This plugin should be the best all round for nearly any system. Click "NEXT >>>"

Now you will need to select a CD-ROM plugin. I recommend that if you are going to be playing from actual CDs to simply select 'epsxe CDR ASPI core 1.5.2' and click 'Configure' right under the white list box. In the popup which appears it will say "Select CD-ROM" and have a drop down list below it. Drop down the list and pick whichever of your drives you would like to use for reading the discs. Click "OK". If you plan on playing from image files or ISOs then you can ignore what I just said. Click "NEXT >>>"

Next comes configuring the gamepads. This should be pretty self explanitory. Click on which Pad to configure and change buttons to your preference. Click "NEXT >>>" when you are done. Click "DONE"

9) Ok. Now if all is well you can attempt to play a game. For users who wish to play from an actual PSX disc you can put it in the cd/dvd drive you selected earlier now. When ready Click "File > Run CDROM". Be patient and hope for the best.

Users who wish to play ISOs can mount the image directly in epsxe by clicking "File > Run ISO" and selecting your image in the popup window which shortly proceeds.

10) Congratualtions! Hopefully your playing a game right now and enjoying it.

----------------------------------------------

If anyone has anything else useful to add for a beginner - knock yourself out. :)
I was downloading Civilization 2 for the ePSXe. there were like 8 different files. the files are RAR. PART. Do i have to get all them??

Also I just tried copying to hard drive from my cd. It stopped saying files couldn't copy, so i tried to skip them because they didn't seem needed. Ex. Wounder00.STR
Wasn't there a program that would let me Rip and Copy??

[montpics]

You need to grab all the 8 parts of the game before you try to unRAR them.

[Hjustin2]

For wireless out here on the Miss. River that will take a while.

[Hjustin2]

Well how do you unrar them???

[montpics]

WinRAR (http://www.rarlab.com/) :)

[Jale]

7Zip > WinRAR.

[Maximus]

im trying to play ff7 through this, yet on the battlescreen its all blanked out so it renders the point of playing the game useless. Any help?
got a screenshot of it, http://img91.imageshack.us/img91/5632/54594408pj1.jpg

[montpics]

Try to set as 'Fast' setting on any Pete's GPU plugins' configuration (remember to limit the FPS to 60). This may do a lot on "try and error" until it meets to your expectations.

Good luck.

[Leerz]

im trying to play ff7 through this, yet on the battlescreen its all blanked out so it renders the point of playing the game useless. Any help?
got a screenshot of it, http://img91.imageshack.us/img91/5632/54594408pj1.jpg
if you could care less about fancy OPENGL popy Graphics, get peop's soft graphics plugin :D

Cheers and Goodluck

-Lrz

[Hjustin2]

Im still workin studying on romhacking. this stuff takes a while.

[dr_patz]

The Eternal SPU Plugin functions well, thanks for the assistance amigo.

[dr_patz]

My specs:
Processor: Pentium 4 CPU 2.00GHz
Memory: 256 MB of RAM
Video Card: GeForce MX 440 128 MB

What plug-ins are more suitable for my pc?

[ronnieburling]

i have just downloaded epsxe and have downloaded the gpu pete open gl2 plugin
and i have downloaded a final fantasy 7 rom the rom runs but it lags on the video and on the audio also the battle command list does not display at all i was wondering if anyone knew a configuration setting for the plugin that would help me run the rom without the battle command list not showing and to also stop from lagging any help will be appreciated thank you

[Leerz]

ronnieburling, what's your PC specs?
if you're having slow rendition with gl2, get the latest version of the first GPU

[ironius]

Hey, I have tried using magic iso and isoproducer, and neither detects my ff7 cd in the drive e. I tried switching my format thing on the isoproducer to aspi and the program stoped responding and wont open now. Why won't these programs detect my ff7 cd in the drive?

[simran_punjabi4]

hey buddy wass up, where can i find bios settings for my pc

[zemiguel15]

I have a problem, I did everything that you said on how to play with the emulator exept de sound pluggin which is a newer beta version, anyway, when I'm running the iso file with DBZ BT 3 the screen stays black for ages!!

What should I do?

Thanks :)

Help me as soon as you can please :D

[potz]

im new here, can someone send me the BIOS ? my Yahoo messenger ID is potz_dd

Thanks in advance !

[melvsdoi]

hi! thanks for that PS1 emu configuration...
will you please post also the General Setup and Configuration for PCSX2?
Please? thank you and more power!

[azoreseuropa]

hi! thanks for that PS1 emu configuration...
will you please post also the General Setup and Configuration for PCSX2?
Please? thank you and more power!

Why ? PCSX2 site already have done that. They are the best General Setup and Configuration you ever know. Use your brain! :p

They are the developer. :happy:

Here:

http://www.pcsx2.net/guide.php

[followtherabbit]

Hey guys!! Newbie here!! Thought everyone might want to know that there is a new version of espxe out (1.7.0!!)....check it out here....

http://www.epsxe.com/download.php

Hope this helps anyone....found it completely by fluke chance!! Cheers!!:)

[azoreseuropa]

Hey guys!! Newbie here!! Thought everyone might want to know that there is a new version of espxe out (1.7.0!!)....check it out here....

http://www.epsxe.com/download.php

Hope this helps anyone....found it completely by fluke chance!! Cheers!!:)

Too late.

http://forums.emulator-zone.com/showthread.php?t=13083

You need to be very careful and look around. Look at:

http://forums.emulator-zone.com/forumdisplay.php?f=34

then scroll down until you see it. I never missed any emulators news. cibomatto2002 and I always posts things there. That's what you need to go there. :)

[BrownThunder209]

Hello.
I'm new when it comes to emulators so forgive me if this queston has alredy been answered. I followed all instructions on the first page of the post but when i try to run the program i get an error message

"This application has failed to start because zlib1.dll was not found. Re-installing the appplication may fix this problem."

I've tryed redownloading it 3 times but i get the same thing.
Any help would be much apprecieated.

*Ah i found a fix on my own. I just had to do a google quest to find the file in question!*

[Horror]

I need some major help right here. I'm on step# 3: Configuring the video. When I click config to choose one of the plug-ins nothing happens. My computer chooses neither and I can't go any further. Anyone know what the problem is?.

[robieX13]

hi all. as you see i registered today in here, looking for help with the ePSXe,
i successfully configured the emulator, did all the hard work, but there is only one problem.. icant start playing beacuse i cant find any game..lol so if someone can help i would aprreciate

[BrownThunder209]

So are u sayin that when u go to File>Run ISO nothin shows up? Or are u askin where to find ISOs?

[azoreseuropa]

Remember, the rules say that we cannot help you where to find the games. Google is your best bet and if you still can't find it then we are sorry but it is against the rules here to tell you where.

[Riku]

Yo guys

I've downloaded everythng it says here....

but i also had to download

xlib1.dll...

Since the plugings included in this are older..i have the newest versions of them...

When i run my ISO (final fantasy :ultima edition) i get these messages:

Gpupeteonengl2:Missing render texture extension

Peteopengl2:No pixel format found


Im not quite sure when im missing so are any of you able to tell me?

Cheers guys

~Riku

[montpics]

It may have something to do with your display card. Post your PC specs. :)

[duh dephekt]

Nevermind, got it fixed.

[kandoo]

Hello.
I'm new when it comes to emulators so forgive me if this queston has alredy been answered. I followed all instructions on the first page of the post but when i try to run the program i get an error message

"This application has failed to start because zlib1.dll was not found. Re-installing the appplication may fix this problem."

I've tryed redownloading it 3 times but i get the same thing.
Any help would be much apprecieated.

*Ah i found a fix on my own. I just had to do a google quest to find the file in question!*
Thank you

[geohound420]

hello im running ff8 off the cd and my epsxe is running way to fast how can i fix this plz help me out thanks

[montpics]

Check this thread. :)

>CLICK HERE!< (http://forums.emulator-zone.com/showthread.php?t=673)

[gopack]

Hey guys im new to the site, I downloaded everything, im pretty sure i have it all there, i used alcohol 120% and made an image of my ff9 disc 1 and when i launch epsxe i get a black screen and it says we have encountered a problem and have to close, if this has been answered before i apologize, but any suggestions?

[gopack]

should i try and conver my psx disc into a cdrom instead of trying to use an iso?

[gopack]

nvm, i tried using psx instead of epsxe and so far its working great

[azoreseuropa]

@gopack,

Try to use the edit button. :)

Do not double posts, ok ? :p

[eViLaNgeL]

For some reason i cant play PS2 game (using Pcsx2). When i try to run the game i open PS2 console where i can change languange time zone....
Pls Help

[y8ycgl]

When i got to the part where i had to run ePSXe.exe it said zlib1.dll was not found... what does that mean?

nvm! XD

[vultures]

you're missing ASPI layer, give a try to forceASPI (http://force_aspi_18.w.interia.pl/). If you're using win 2k/Xp you can switch to SPTI (IOCTL).

Anyway, to use an *original* FF9 PAL CD on ePSXe, you'll need the specific patches (http://www.ngemu.com/misc.php?action=ppf). Get only the files for your region (PAL UK). Then unzip the patches (.ppf) to ePSXe "patches" folder, then rename each one acording its respective CDs: In FF9 CD number 1 main folder there is a file named "SLES_029.69". Rename the .pff exactlly as that file, the same for the other CDs, but note the SLES_#.29.69 will have "1", "2", and "3" instead "#".
Don't forget to and leave them on the "patches" folder. Should load OK then ;)

Nvm this post, I downloaded PSXfin and it worked flawlessly right off the bat, none of this extra stuff missing

[djones_20]

Hey, I just finished DL the epsxe as well as the plugins, now I'm at the step to open it, but I get the error "This application has failed to start because
zlib1.dll was not found. Re-installing the application may fix this problem.

I've re-installing several times, and have not been able to get pass this step and am now unsure of what to do.

[Hashinator89]

Hey, I just finished DL the epsxe as well as the plugins, now I'm at the step to open it, but I get the error "This application has failed to start because
zlib1.dll was not found. Re-installing the application may fix this problem.

I've re-installing several times, and have not been able to get pass this step and am now unsure of what to do.

I'm having the same problem, except i'm not sure about the installation. Does it automatically install once you unzip? Thanks.

EDIT: Google search seems to help, hint hint for newbies like me.

[secondchance]

hey, I'm a new guy here like everyone else that posts on this particular topic. I installed everything you listed, but when i go to open the psx, it says it can't find zlib1.dll I tried reinstalling it, but it still didn't work. I'm going to try to find it online, but I don't know where to put it if I'm able to find it. Any guesses, suggestions, etc?

[JoshM22]

How do i play eboot files with this program?

[daneep]

This is awesome! Much Obliged!! :bow::bow:

[zurodine178]

HELP!!!
I downloaded everything like I was supposed to but when I wen to go and start up the ePZXe program a message came up saying
'This application has failed to start because zlib1.dll was not found. Re-installing the application may fix this problem.' If anyone knows what going on please let me know.

[Mystic]

HELP!!!
I downloaded everything like I was supposed to but when I wen to go and start up the ePZXe program a message came up saying
'This application has failed to start because zlib1.dll was not found. Re-installing the application may fix this problem.' If anyone knows what going on please let me know.

Then you didn't download everything.

http://www.dll-files.com/dllindex/dll-files.shtml?zlib1

[zurodine178]

thx for posting the link but umm where exactly do i place it?

[retroguiden]

In your ePSXe folder.

[zurodine178]

in just that folder or in onen of the folders that are in the epsxe folder?

[retroguiden]

in just that folder or in onen of the folders that are in the epsxe folder?

Just the main ePSXe folder. :)

[chrono84]

im having trouble with running this on vista. i keep getting an error saying "this application has failed to start because zlib1.dll was not found" i thought maybe it was an os issue, but i tried running it with compatibility wizard into an earlier os, but got the same message. any help would be greatly appreciated, thnx

[chrono84]

omg, sorry, i guess i didn't read all posts like i though i did. thnx retroguiden for your earlier post

[zurodine178]

Just the main ePSXe folder. :)

thank you now im haveing lagging issues but i think i can figure that out on my own

[zurodine178]

im still having issues. for certain games some of the graphics come up as black screens. for ex. i have a ff tactics iso and the world map becomes a black screen while the points you choose to travel on are still there. the actual game that i have will lag and freeze horribly. any ideas whats up?

[retroguiden]

im still having issues. for certain games some of the graphics come up as black screens. for ex. i have a ff tactics iso and the world map becomes a black screen while the points you choose to travel on are still there. the actual game that i have will lag and freeze horribly. any ideas whats up?

Try P.E.Op.S soft GPU plugin. If you're using save states then start a game from the beginning using the mentioned plugin.

[Baltazar]

Very nice tutorial,tanx.And one more question please...do you know how to install regular joypads,i have original sony joypads and also some usb wire to connect them to computer,but somehow i cant find option to activate them.Is there any at all?Thanks.

[Konzen]

Hello people! Cool to be here. Lotsa nice info.

Anyway, I'm quite hesitant to start a thread for just one question. So here goes.

I am currently playing Breath of Fire 3, and I am experiencing lagging problems. The game slows down in random parts of the game - both video and audio. I've read somewhere here that in cases wherein the game is going too fast, the video config should be tweaked. Does it follow that I should I also do the same solution? Also, I'm not quite sure how to tweak these settings. It would really help if any of you would suggest ideal settings for my problem.

Thanks in advance. Really appreciate this. :D

[Mystic]

Hello people! Cool to be here. Lotsa nice info.

Anyway, I'm quite hesitant to start a thread for just one question. So here goes.

I am currently playing Breath of Fire 3, and I am experiencing lagging problems. The game slows down in random parts of the game - both video and audio. I've read somewhere here that in cases wherein the game is going too fast, the video config should be tweaked. Does it follow that I should I also do the same solution? Also, I'm not quite sure how to tweak these settings. It would really help if any of you would suggest ideal settings for my problem.

Thanks in advance. Really appreciate this. :D

You shoulda started your own thread for this, but w/e.
What are your system specs?
What plug-ins are you using?
Can you give us a screen shot of your graphic plug-in set up?

[Konzen]

Hi Mystic. Thanks. Actually just a few minutes since I posted that query, I instantly fixed it on my own! Haha. Stupid me. I only had to try an another graphics plug-in. All's well... UNTIL I reached a certain point in the game.

There's a part in the game wherein Ryu (the game's protagonist) is asked to chop wood. And I, as the player, am required to use the Triangle button for Ryu to hack the wood. Btw, I assigned the Triangle button to letter W in the keyboard. There's a time limit for the challenge so I really have to hack as many wood as I can. And so the timer starts and I noticed, THE TRIANGLE BUTTON (W) DOESN'T WORK! I tried other buttons but to no avail. Until the game hangs up, and I am forced to quit the emulator. Right now, I'm starting to hunt for solutions but no luck yet.

So there. So much for the instant solution. Might as well try Vagrant Story while figuring out what to do.

Thanks thank thanks!

EDIT: I fixed it again. Sheesh. Really stupid me. Is there such a thing as an ULTIMATE plug-in? I'd really love to have that. LOL

[zurodine178]

Try P.E.Op.S soft GPU plugin. If you're using save states then start a game from the beginning using the mentioned plugin.

thx for the info but i cant find the plug in. where's it at?

EDIT: Nevermind I found it

[Bridge]

Please can you answer my question?
why my burutter.dll. didn't not found when i open my epsxe?

[retroguiden]

Please can you answer my question?
why my burutter.dll. didn't not found when i open my epsxe?

Because the file is missing. Try to do a search on Google for the filename and download it. Then save the file to the ePSXe folder.

[rollinmar]

Okay, here is a video telling you exactly how to get epsxe setup to play games. It even tells you where to find the required system bios. This should help out a lot: http://www.youtube.com/watch?v=vAVy2mHkavI

[nicksolazy]

Hey I have a problem. I load everything do all the bin stuff and everything. When i load my game none of my keyboard buttons work. Anyone know how to configure it?

[FatTrucker]

Before you load a game open Config from the toolbar, select Gamepad and then port 1. You can define your controls in there.

[kuzai]

i'm trying to use controller now, but i couldn't use it in game..any help?do i need another driver or something?

thx for the helps

[FatTrucker]

Does the pad map to the controls ok in the Pad config utility?. You need to click on each button description displayed on screen, then push the button or direction on your pad that you want to use for that function. You should see the text change to identify the button press you've just made.

If you have successfully mapped your controller in the ePSXe pad config utility then also consider that ePSXe allows you to select the type of emulated controller (digital pad, dual shock etc) this will be the drop down menu in the top right corner of the pad utility screen.
I have found that ePSXe will expect different types of controller dependent on the game.

For example, I use a Dual Shock 2 with ePSXe and with most games its fine but some older games like Legacy of Kain - Blood Omen, won't work with it, however if I go back into controller config and set the controller as a PS1 Digital Pad (the one without analogue sticks) it works perfectly even though I am still using the same controller, so you need to use the pad config utility to tell ePSXe what type of Playstation controller you want it to emulate.

Hope that makes sense. If you're still stuck or not sure what I mean then post again.

[sir juoelvis]

i did all u said (just if this has to do with it not working i live in brazil.)
it appeared a window when i clicked on epsxe the translation is this:
this applicative can not be started because zlib1.dll wasnt found, the reinstall can correct the problem.i reinstalled it 2 times!!

[sir juoelvis]

ok i got it now, just i cant open em when i downloaded, it came various games with it but i cant open em
plz help
thx

[retroguiden]

Well, in what format are these games? Isos? Go back to the first post on the first page in this thread. Do all the configuration steps, and when the emulator is fully configured check the second part of step 9 in that post. That gives you somewhere to begin to figure it out. if you get stuck after that post again and include as much info on the problem as possible.

[sir juoelvis]

i did all the things he said (all but put it in c:program files, cuz my big brother blocked it i dont know how, does this matter? i put it in c:epsxe) and the files are just llike this one
ex:
Ridge Racer Type 4.dt2
thx

[retroguiden]

Never seen that file extension on a game before. Someone else?

[sir juoelvis]

SOWHAT DO I DO??
does it have somthin to do whit the place?

[retroguiden]

Easy now. You won't get help faster by shouting about it and bumping the thread.

In answer to your question: No, it doesn't matter where you put the emulator. epsxe folder is ok. The problem is the file extension on your game. Do they all end with DT2? That's not an extension I recognize and googling it turns up something about raster information files which I don't think is what you have.

[sir juoelvis]

sorry just jokin :)
but what CAN i do?

[retroguiden]

sorry just jokin :)
but what CAN i do?

Read my posts more closely! :msn_tongu

I asked: Do they all end with DT2? That means your games.

Oh no... I think I just found the answer. Check to see how big the "game file" is? Shouldn't be more than 100kb right? That's not games. That's configuration files for the Delta frontend. My guess is you have no games then, so until you do you won't be able to play. Sorry.

[sir juoelvis]

forgot to say, when i open a ganme on the emulator it says no wgl ezxtentions

[sir juoelvis]

oh thats true, well i just downloaded a rom and i put it there and the same thing happend

[FatTrucker]

As retroguiden said what you've downloaded is the ePSXe with the Delta Front-End, you don't actually have any game files to load in the first place.

You best bet would be to download the latest version (1.7) of ePSXe from this site. Don't bother with Delta as its a waste of time and only duplicates what ePSXe does anyway.

Next you will need a PS1 bios rom. We can't link to one here as it breaches the forum rules so you will need to find one yourself. The most common one is called scph1001. This is the Playstations operating system and the emulator won't work without it.
Once you've got the necessary bios you need to source PS1 games in ISO format. These are disk images and will typically be a few hundred Megabytes in size or you can rip your original PS1 disks yourself.

[sir juoelvis]

explain calmly please im not much of good in fixin with emulators so i got the bios u said already, ewhat do i du?
whats wgl?
thx for the attention:)

[FatTrucker]

Ok firstly it doesn't look like you have any game files, just emultor setup files for the games but not the games themselves.

wgl will be referring to your videocard or settings. What spec is the PC you are trying to run it on?, i.e Processor, Videocard, Ram, and operating system.

[sir juoelvis]

how do i find those things?
(yea im a reeeeaaal nooob)

[sir juoelvis]

??
:confused:

[kuzai]

Does the pad map to the controls ok in the Pad config utility?. You need to click on each button description displayed on screen, then push the button or direction on your pad that you want to use for that function. You should see the text change to identify the button press you've just made.

If you have successfully mapped your controller in the ePSXe pad config utility then also consider that ePSXe allows you to select the type of emulated controller (digital pad, dual shock etc) this will be the drop down menu in the top right corner of the pad utility screen.
I have found that ePSXe will expect different types of controller dependent on the game.

For example, I use a Dual Shock 2 with ePSXe and with most games its fine but some older games like Legacy of Kain - Blood Omen, won't work with it, however if I go back into controller config and set the controller as a PS1 Digital Pad (the one without analogue sticks) it works perfectly even though I am still using the same controller, so you need to use the pad config utility to tell ePSXe what type of Playstation controller you want it to emulate.

Hope that makes sense. If you're still stuck or not sure what I mean then post again.



it's work!!thanks

[lugewsupas]

ive alredy finish downloading some game files from the net but some files came up to be a MDF, MDS, and many others (exept for the ISO and BIN this two works perfectly) ive tried renaming some files to ISO and when i try to start s them it wasjust plain black,,,, so how can convert this file to ISO in a good way?? and whats the problem the plugins or the way i convert the files???? help me please i beg of you :bow::bow::bow::bow::bow::bow::bow::bow:

[GENEW]

error occurs it wont play

"This application has failed to start because zlib 1.dll was not found. reinstalling the application may fix this problem"

where did i go wrong.

the plugins are already in the plugins directory.

[Zach]

http://forums.ngemu.com/epsxe-discussion/106182-zlib1-dll-not-found-fix-here.html

Try this solution

[unknownerrors]

ve alredy finish downloading some game files from the net but some files came up to be a MDF, MDS, and many others (exept for the ISO and BIN this two works perfectly) ive tried renaming some files to ISO and when i try to start s them it wasjust plain black,,,, so how can convert this file to ISO in a good way?? and whats the problem the plugins or the way i convert the files???? help me please i beg of you

check or PowerISO, you should be able to open that format and save it as another.. renaming the file ext will not do the trick.

http://alphapirates.com/ (http://alphapirates.com/index.php?categoryid=31)
has a good copy of powerISO to use.

[Jonarg]

i followed every step till 8 and when i try to open it it said somthing.dll plugin not found
what do i do?

[retroguiden]

i followed every step till 8 and when i try to open it it said somthing.dll plugin not found
what do i do?

look a couple of posts above, or search this forum for zlib1.dll because the solution has been touted around here many times!

[lxxl_phuck_lxxl]

i followed this it got rid of my wlg error thing but now jus a blank black box shows up anyone have any help? please? ive been trying to get this to work for such a long time if anyone has team viewer that has some free time show me how to get this to work?? im so frustrated :mad:

[josef1975]

hi, I've a question: I'm using espxe with a vga to scart rgb cable (I have made THIS (http://digilander.libero.it/venturi1975/index.html) guide on how to build it) an I should disable every thing like hardware stretch or similar because I want to run the game at his original resolution; using pete's opengl2 driver I selected "keep aspect ratio", is the corret option?
thank you :happy:

[debaser]

I'll be needing a bit of help. Y'see, i followed the configuration that Guitar put up and noticed a few holes. Always disappointed to see that a few things are always missing, definitely minute details...but details none the less. Good guide though and keep in mind from here on out i've followed all steps thoroughly...this is now a troubleshooting issue.

I'm having the usual crash problem from days old where my System Command comes up after i try to runCDROM or runISO - which i have an .iso loaded in DAEMON tools. I've also tried to runBIOS and yields the same result, "ePSXe.exe has encountered a problem and needs to close. We are sorry for the inconvenience." Of course, i choose "Don't Send'' error report and get frustrated.

Extra Steps I've Taken Not Listed In Guitar's Configuration Guide:

1. I had to install a SmartIO.dll driver and put it in my Windows\System folder as well as ePSXe\Plugins folder. Then i had to instal a WNASPI32.dll driver and put it in the Windows/System folder.

2. Was not informed, but downloaded and installed the zlib1.dll driver and put it in ePSXe\Plugins as well as \ePSXe folders.

3. I have downloaded ForceASPI18 and ran each .bat and carried out full instructions and have restarted my CPU twice now.

4. i understand some roms are faulty so i have a coulple and have tested them on other peoples CPU's and my iPod Touch 2.2.1, oddly enough. They worked there.

I can't think if i'm missing too much. I do have a few theories.

-When i try to Test or Configure some item in the Sound and CD-ROM configuration it can crash or even give a message saying it can't find my D:/ Drive (Where the .ISO is loaded.) I'm thinking maybe i'm not that good at configuring what i need so i've included my system specs below. It seems that most to all Video plugins test and configure perfectly. Sound seems to fly right, but i don't think i've got my CD-ROM pinned.
-I could be missing essential drivers all around for my CPU as i have recently reformatted and did the best i could to update through windows updated. If this could be an issue, could someone give me a list of all Drivers (.dll) ePSXe uses?
-I'm using a compaq/toshiba/hp made Laptop and i've dropped it in the past, could my DVD Drive really be faulty ( Even though it usually works to write DVD's and read discs)


Basically that's all i've got. I'm going to work for a bit and it would be awesome to come home to an answer. I don't really expect anyone to spend a lot of time on this, i've just been reading on the site for a few nights now and been working solo on this emulation project for a few weeks now. I just really wanna nail this, it's been bothering me as i've been fairly adept at using/hacking other emulators. I love our subculture as i recently jailbroke my iPOD touch, and i know givin patience and trial i can figure this out with your help. I am a n00b but i'm not a complete idiot. Just can't think of much else.



SPECS:

Using ePSXe v1.6.0
Trying to play FFTactics on .iso or Xenogears on .cue/.bin.
*I also own these games and others i could use as straight CD-ROM usage to test.

"Toshiba - Compaq (hewlett-packard)
Presario v2000
Microsoft XP Pro 32-Bit, Serv Pack 3
AMD Turion 64 Mobile ML-30
1.6 GHz
640mb RAM

Disk Drive: Toshiba MK8025GA5
Video Card: ATI RADEON XPRESS 200M
DVD-ROM Drive: HL-DT-ST DVD-RW GWA-4082N
Sound Card: Conexant AC-Link Audio

[blayloc3]

Hello everyone,

I was excited to try this out but I keep getting an error:

Opcode [3f-ffffffff] in PC [1f000000] UNKNOWN [000002c3:223:488]

I am using:

epsxe v1.7.0

Have tried the following gpu's:Hello everyone,

I was excited to try this out but I keep getting an error:

Opcode [3f-ffffffff] in PC [1f000000] UNKNOWN [000002c3:223:488]

I am using:

epsxe v1.7.0

Have tried the following gpu's:

P.E.Op.S OpenGL Driver 1.78
P.E.Op.S Soft Driver 1.14
P.E.Op.S Soft Driver 1.16

and the following spu:

Eternal SPU Plugin 1.50
(I don't believe to be the spu though)

Have tride these game:

FF7 original disc 1 (NTSC)
FF7 ISO disc 1 (NTSC)
Breath of Fire 3 ISO disc 1 (NTSC)

Obviously my region is NTSC.

I haven't tried an original disc of another game but I will.

I believe it could be my laptop which is a refurbished Dell Inspiron 1525 with a Mobile Intel 965 Express Chipset. I know that the chipset is not able to run the graphics for the PC version of FF11 cause I tried to install it and they didn't work. All the other features are good though. That is the only one I question. I will try a different laptop as well.

The summary is that I hit run disc or run iso and it starts to run, then the screen turns black and after a few moments the error message from above appears. Any advice?













Okay scratch the error. I figured out that the BIOS was faulty, fixed it and now I just get a blank screen I will attempt different plugins until I get something. However, I thought I would ask about this I get an init aspi (235) error when I attempt to click the the run BIOS button. Why is that and what should I do? I have windows vista if that helps.

[Laker5]

thanks, this really helped

[Mr. DNA]

Hello there! I wonder if somone could help me. I have recently started mucking about with emulators after having been given great advice here in the Nintendo forum. I'm probably trying to run before I can walk here, but I've been trying to get to grips with the ePSXe emulator, using the guide on the first page, and although I've worked through the guide a few times now I keep encountering the same problem.

When I reach stage 7 of the guide...

(7) Once you have done all of this it's time to start epsxe for the first time. Go to the directory you installed epsxe too and double click the icon titled 'ePSXe.exe'. The program should start shortly.)

...and double-click the icon, the programme doesn't start. Instead I get a message saying:

"The application has failed to start because burutter.dll was not found.
Re-Installing the application may fix this problem."

I have tried re-installing several times but to no avail. The weird thing is that there does seem to be a file titled "burutter" sitting beside the "bios", "plugins" and "ePSXe" files in the initial WinRAR window. I've tried simply extracting this "burutter" file to the location of the ePSXe file (as well as the plugins folder), but I simply get another error message. Has anyone got any ideas? Thanks.

[FatTrucker]

take the burutter.dll and copy/paste it into your windows/system32 folder.

[Mr. DNA]

I wasn't able to directly copy and paste "burutter.dll" to the system32 folder, so I extracted it to the desktop and then just dragged it into system32. It seemed to transfer, although when I scrolled down through the large system32 folder I couldn't see the "burutter.dll" file...

Anyway, when I then go back to double-click on the ePSXe icon, I still get the "burutter.dll" error.


A quick question- when you extract the initial epsxe emulator files into C:/Program Files/epsxe, as the guide instructs, do you only extract the file titled epsxe, or do you also extract the other files that are there, such as the "burutter" file which is visible in the initial WinRAR window? I have the same question for the graphics and sound plugins- do you extract everything that pops up in the WinRAR window, or just the obvious named file?

[FatTrucker]

Extract everything into the ePSXe folder. Playstation emulators use the PS1 bios rom to run. It doesn't form part of the core download because its a copyright rom of the Playstation operating system. The usual one is called scph1001.bin

When you run ePSXe for the first time you need to open the config menu from the toolbar, select the bios option and point it at the location of this bios file.

[Mr. DNA]

Extract everything into the ePSXe folder. Playstation emulators use the PS1 bios rom to run. It doesn't form part of the core download because its a copyright rom of the Playstation operating system. The usual one is called scph1001.bin

When you run ePSXe for the first time you need to open the config menu from the toolbar, select the bios option and point it at the location of this bios file.

Nah- something's not happening for me with this. When I follow the guide to the letter I get the burutter.dll error after trying to open ePSXe for the first time (I take it the help you are giving me for opening the programme for the first time is for the stage after double-clicking the file...). Copying and pasting burutter.dll into system32 didn't do the trick. The emulator Gods are telling me to walk before I can run- I should concentrate on some of the other emulators I have that do work. Thanks for all of your help.

[FatTrucker]

Cold be as simple as an old or slightly wonky .dll

I would google burutter.dll and the first option you get should be a direct link to download it from somewhere like dlldll.com

Grab it, and extract it into your ePSXe folder just to rule out a bad file. What OS are you running by the way.

[Mr. DNA]

Cold be as simple as an old or slightly wonky .dll

I would google burutter.dll and the first option you get should be a direct link to download it from somewhere like dlldll.com

Grab it, and extract it into your ePSXe folder just to rule out a bad file. What OS are you running by the way.

Hmmm. Not exactly progress, but at least I'm getting a different error message now. I did what you instructed, and instead of the burutter error, I get:

"This application has failed to start because zlib1.dll was not found."

A case of looking for zlib1.dll and putting that into the ePSXe folder? It's endless!

EDIT; Oh, and I'm running Vista on a Core 2 Duo Laptop, 3 Gig Ram, Nvidia 9200M.

[FatTrucker]

Yep. missing zlib1.dll is probably the most common support request with ePSXe. Just download it and bang it in the emulator root folder.

[Mr. DNA]

Yep. missing zlib1.dll is probably the most common support request with ePSXe. Just download it and bang it in the emulator root folder.

Bwahahahaha! Sweet sweet success! Another hic-up is inevitably around the corner, but I at least seem to have the emulator up and running instead of those horrible error messages.

Cheers, Trucker! :D

[OUTthaWAZOO]

i just downloaded epsxe and all the other related files and placed them in their correct folders according to the guide, but when i open the .exe file it says burutter.dll cannot be found when it is clearly there. do i have to place the .dll file in an existing folder or make a new one or what?

[FatTrucker]

The one you've got is probably just old or broken (if its the one that comes with the emulator download then I'm pretty sure I've had the same prob with it), re-download burutter.dll and stick it in your ePSXe folder. Should work ok then.

[OUTthaWAZOO]

i downloaded burutter.dll a couple times from different sites and none of them solved the problem. any other ideas?

[OUTthaWAZOO]

Alright, I've got it up and running, but when I try to run a game, my screen goes black for a few seconds then comes back and is at really low resolution (800x600 I think).

[kkck]

Hi all!

First post here lol

Some time ago I downloaded the latest emulator because I wanted to play Final Fantasy IX but I could never really get it to work. After long hours of looking for files and changing the configuration to any combination possible, the furthest I got to play the game was to listen to the intro's music but no image regardless of the waiting. Can anyone provide any tips as to what I could do to make my emulator work? Any help would be appreciated. I have windows vista.

Edit: If this is not the appropriate thread for this let me know and I will delete the post. Or a mod could move it to a more appropriate place.

[kkck]

Help anyone? Anyone there?
**Crickets in the background**

[FatTrucker]

Help anyone? Anyone there?
**Crickets in the background**

Please provide: System specs (Processor, Ram, GPU, DX version), plug-ins you are using, original disk or ISO?, region of the disk/ISO (US, JAP, EU) and what Bios you're using.

That should cover most of the things people might need to look at the problem and see what the cause might be. Seems most likely an issue with your type of graphics hardware, and/or the graphics plugin you're using but without the relevant info it could be any number of things.

Also with Playstation emulation its always worth doing a litmus test with the PSX emulator. PSX isn't plug-in based and requires very little in the way of setup, it also offers more faithful emulation than ePSXe (but not so many whistles, bells and enhancements) if the game works ok with PSX you know its probably just a settings issue with ePSXe.

If it doesn't work with PSX then its more likely to be related to your hardware or game image.

[Blockinlick]

I downloaded Worms World Party. It took 2 hours to download (233 MB With Wireless Broadband). When it was done I extracted it to C:/Program Files/epsxe for easy access.

When I attempted to run it, the game was not there. I then tried to find the game in my Downloads so that I could try to put it in another folder and it was gone.

I searched for the word Party in my documents and the GBA and 64 worms games showed up, but not the PSX ISO.

I then downloaded another file to open my downloads list. It was there, but it wouldn't let me open the file.

What is going on?

[kkck]

Please provide: System specs (Processor, Ram, GPU, DX version), plug-ins you are using, original disk or ISO?, region of the disk/ISO (US, JAP, EU) and what Bios you're using.

That should cover most of the things people might need to look at the problem and see what the cause might be. Seems most likely an issue with your type of graphics hardware, and/or the graphics plugin you're using but without the relevant info it could be any number of things.

Also with Playstation emulation its always worth doing a litmus test with the PSX emulator. PSX isn't plug-in based and requires very little in the way of setup, it also offers more faithful emulation than ePSXe (but not so many whistles, bells and enhancements) if the game works ok with PSX you know its probably just a settings issue with ePSXe.

If it doesn't work with PSX then its more likely to be related to your hardware or game image.

Ok, didn't realize I was providing so little info lol.
here it is:


http://i722.photobucket.com/albums/ww226/kkck/system.jpg
Disk is original.
Not sure what the pluggings are.
My bios is SCPH1001.BIN
Game was made for the USA area.

[kkck]

I tried the PSX emulator you suggested and my game worked. Thanks for that lol.

I got another problem now though. After playing for a while I get this error though:

IO control: raw read error, Data error<cyclic redundancy check>
I get the impression this might be due to the disk. Is there any way to get past this or do I have to just get another game disk?

[Faithless]

hi

I have problem finding the NTSC bios and the PAL bios for the emulator.

I know it's illigal so if anyone know where to find it, send me a pm

thnx

[Faithless]

nobody???

[montpics]

hi

I have problem finding the NTSC bios and the PAL bios for the emulator.

I know it's illigal so if anyone know where to find it, send me a pm

thnx

Sorry, can't help you with that. Furthermore, it was pretty much easy to be found these days through Google! :)

[mjturim]

i downloaded the newst psx emu 1.70 and it does not wanna run no matter what i do my psx1.60 runs do i need a new bios for 1.70 or am i just missing something

[montpics]

You just need to look for BIOS and plugins in order to make it work.

If you don't have any, you can try to look for plugins at this link : >CLICK HERE!< (http://www.emulator-zone.com/doc.php/psx/psxplugins-tools.html)

As for BIOS, you have to look for it through Google. :)

[komuroto]

----------------------------------------------
General Epsxe Setup and Configuration:
----------------------------------------------

1) First you will need to make sure you have the latest copy of epsxe. As of today - August 1, 2004 - the most recent version is 1.6.0. If you do not have this release you can download it here...

| ePSXe (http://www.emulator-zone.com/doc.php/psx/epsxe.html) |

2) Once the file is finished downloading double-click it's icon. The file should automatically open in an archiving program such as Winzip or WinRAR. If you don't have such a program you can download one from either of these locations...

| Winzip (http://www.winzip.com/downwz.htm) |
| WinRAR (http://www.rarlab.com/download.htm) |

Keep in mind both of the previous downloads are evaluation copies or "trial versions"

Once you open the epsxe zip file choose to extract all of it's contents to the following path (this can be done by manual navigation to that location or by typing out the path name):

DRIVE:/Program Files/epsxe (Replacing "DRIVE" with your hard drive's letter)

3) Retrieve a Playstation BIOS file from elsewhere on the internet. It is considered in most countries to be illegal to be in possession of such a file so we cannot post links to it here. The file you will need can have two names --- one for NTSC (North American) games and one for PAL (European) games. Most likely - you will need the NTSC file. They are titled as follows:

- NTSC - SCPH1001.BIN
- PAL - SCPH7502.BIN

4) Once you have successfully download the correct BIOS for your region, extract it or place it in the following folder (assuming you used the suggested installation directory for epsxe as stated above)

DRIVE:/Program Files/epsxe/bios ("DRIVE" being you hard drive letter)

5) Next you will need to download some plugins for epsxe. Mainly you will need GPU (graphics proccessing unit) and SPU (sound proccessing unit) plugins. These are simply recommendations based on which plugins "normally" achieve optimum performance in most PCs. Download the following files.

GPU Plugins:
| Pete's OpenGL GPU (http://www.emulator-zone.com/doc.php/psx/psxplugins-tools.html) |
| Pete's OpenGL2 PSX GPU (http://www.emulator-zone.com/doc.php/psx/psxplugins-tools.html) |

SPU Plugins:
| Eternal SPU 1.41 (http://www.emulator-zone.com/doc.php/psx/psxplugins-tools.html) |

6) Once you have download all of the previous files (which will open in Winzip or WinRAR) extract all of their contents to the following directory:

DRIVE:/Program Files/epsxe/plugins (Provided you used the suggested path)

7) Once you have done all of this it's time to start epsxe for the first time. Go to the directory you installed epsxe too and double click the icon titled 'ePSXe.exe'. The program should start shortly.

8) You should be greeted with a popup box titled 'Welcome to the ePSXe config setup'. This is a "wizard" to get you started. If you've already run epsxe for the first time and want to access the wizard again click 'CONFIG > WIZARD GUIDE'. If you feel like reading then read what it says - otherwise click "CONIFG >>>" on the bottom right hand corner.

You will first be prompted for the BIOS configuration. Provided you have downloaded the correct BIOS and placed it in the proper folder you should see it listed in the white box. Make sure it is highlighted/selected and click "NEXT >>>"

Next comes the GPU configuration. In the white box will be a list of all the plugins you have for graphics. I suggest using Pete's OpenGL driver but depending on your PC specs - it may be trial and error until you find a plugin which produces desirable results. Once you have selected one click "NEXT >>>"

Here you will need to select the 'Eternal SPU Plugin 1.41' from the white box. This plugin should be the best all round for nearly any system. Click "NEXT >>>"

Now you will need to select a CD-ROM plugin. I recommend that if you are going to be playing from actual CDs to simply select 'epsxe CDR ASPI core 1.5.2' and click 'Configure' right under the white list box. In the popup which appears it will say "Select CD-ROM" and have a drop down list below it. Drop down the list and pick whichever of your drives you would like to use for reading the discs. Click "OK". If you plan on playing from image files or ISOs then you can ignore what I just said. Click "NEXT >>>"

Next comes configuring the gamepads. This should be pretty self explanitory. Click on which Pad to configure and change buttons to your preference. Click "NEXT >>>" when you are done. Click "DONE"

9) Ok. Now if all is well you can attempt to play a game. For users who wish to play from an actual PSX disc you can put it in the cd/dvd drive you selected earlier now. When ready Click "File > Run CDROM". Be patient and hope for the best.

Users who wish to play ISOs can mount the image directly in epsxe by clicking "File > Run ISO" and selecting your image in the popup window which shortly proceeds.

10) Congratualtions! Hopefully your playing a game right now and enjoying it.

----------------------------------------------

If anyone has anything else useful to add for a beginner - knock yourself out. :)

I can not get passed step 7. I get an error message saying cannot find file. Could you talk to me over MSN, or yahoo or something a walk me through this?

[ulaoulao]

what file? be more specific..

[komuroto]

Nevermind i googled it and got passed it.
Your download seems to be missing a keyfile named "zlib"

Final Fantasy IX
My next problem is: Game menus (example) -Attack, or Use- Do not display. Game runs great with no glitches or lag, an nice quality. But no luck on those menus...i'm playing blind.

[zutoc]

Hello, not sure if this problem has been answered before but i've managed to get my emulator running ok the game starts perfectly but after a while, 1 hour or so my screen goes black and my monitor losses the picture, I'm using ePSXe 1.7.0. edit i'm using ISO's not actual discs.

video PE oPS software driver 1.18
sound eternal spu plugin lite 1.41
bios SCPH1001.BIN

system specs
Processor:
AMD Athlon(tm) 64 X2 Dual Core Processor 6000+, MMX, 3DNow (2 CPUs), ~3.0GHz
Memory:
3070MB RAM
Hard Drive:
250 GB
Video Card:
NVIDIA GeForce 8800 GTS
Monitor:
SyncMaster 205BW/204BW, SyncMaster Magic CX203BW(Analog)
Sound Card:
SoundMAX HD Audio
Speakers/Headphones:
logitech
Keyboard:
USB Root Hub
Mouse:
USB Root Hub
Mouse Surface:
Operating System:
Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.090804-1435)
Motherboard:
asus m2n32-sli deluxe wifi edition
Nvidia driver 196 .21

PROBLEM SOLVED. IT WAS MY SCREEN SAVER HEHE btw whats the best video plugin for my graphics card?

[writethemwrong]

how come everytime i try to use ePSXe a pop up comes up saying "zlib1.dll" was not found?? how do i fix this?

[ulaoulao]

how come everytime i try to use ePSXe a pop up comes up saying "zlib1.dll" was not found?? how do i fix this?
download it here (http://www.dll-files.com/dllindex/dll-files.shtml?zlib)and put it in your epsxe folder


whats the best video plugin for my graphics card? the one that works best ;) I think the wizard tells you what is good for nvidia but it depends on the game also,PEoPS d3d 7 I think is what I use.

[zutoc]

is it ok to direct them to things via a PM ? i found a epsxe 1.7.0 with all the plugins preinstalled. not breaking the rules when it's away from prying eyes?

[singlegoldbangle]

i need help

i tried doing the set up and stuff and i am able to play the game but everytime i enter a room, fight an enemy and etc i get that broken record thing. to give you an example... if the song goes a b c d e ( i enter a room) f f f f f f f f f f f f g h i j k .... and im not exagerating about how many times .. i counted.

[ender241]

After trying this i thought it was going to work, but when i get to the bit where you have open up the epsxe it says: zlib1 . dlll was not found.
Any help? Thanks.

I have finally found it, after a quick look through the internet i downloaded it now i just have to download me some games....any1 recommend anything?

[bravesoul32]

Having trouble with resident evil 2 can't get passed the warning of gore screen gets frozen from there using epsx 1.7.0 computer specs
Hp Pavilion m9520f
intel quad core Q8300
graphic card - Nvidai Geforce 9600GS

[kararo000]

excuse me please me to where i can download NTSC - SCPH1001.BIN and PAL - SCPH7502.BIN im a newb please help me :(

[Puzzled1]

Just wanted to say this thread really helped me. Got ePSXe to work on my computer and it's awesome. Thanks!

[ulaoulao]

excuse me please me to where i can download NTSC - SCPH1001.BIN and PAL - SCPH7502.BIN im a newb please help me These are copyrighted materials and we can not help you with that.

[MorskoPseto]

I have problem With PSCX 2 0.9.6 .... when i run the cd it says that the BIOS file is missing, so what do I do? If I need to download the BIOS file can someone put the link here 'coz I can't find it....

[john woo]

Hey man, there's a psx emulator called "PSX" the problem is probably the emulator. I had the same problem with a game called "Bust-A-Groove." Emulator change was needed. Not the BIOS or anything.

[trm989]

I just bought a Samsung Netbook NB30 for travel use and have been wondering what settings for ePSXe would be best for it. Can anybody offer any advice?

Operation System Operation System Genuine Windows 7 Starter
Processor Processor Intel ATOM Processor N450 (1.66GHz, 667MHz, 512KB)
Main Chipset Main Chipset Intel NM10
Memory System Memory 1GB (DDR2 / 1GB x 1)
Memory Slot 1 x SODIMM
Graphic Graphic Memory Shared Memory (Int. Grahpic)
Graphic Processor Intel GMA3150 (Int. Graphic)

[margo]

previously I apologize if I repost...
how to use joypad or gamepad in epsxe 1.7??
thanks for helping :happy::happy:

[ulaoulao]

Be a bit more clear? Setting up in the plug-in troubles I suspect? If so try this...

select the mapping you want to config, click the button you want ( keep it held down ), click the next mapping you want to pick and repeat. If you dont keep the button held down it will unselected that button. I can not believe the epsxe team let this bug go on so long but they did.

[bonvo]

ok ive followed the directions listed here and when i get to the point of trying to open the emulator for the first time i get this
http://i70.photobucket.com/albums/i100/bonvo/wtf-1.jpg

where do i go from here

[bonvo]

if it matters im running windows vista

[seozone]

Hi Members,

Are you doing online business? And do you have your own website?
Then - you surely need SEO Services for your online business or for your new site.
If you need Free SEO/Free SEO for my Websie (http://seotabloid.com) - then Contact with us. We can provide your

desired service.

[firetomysoul]

keek getting err message saying need zlib1.dll any help would be hot.

[firetomysoul]

got the same message did you get it resolved

[firetomysoul]

ok ive followed the directions listed here and when i get to the point of trying to open the emulator for the first time i get this
http://i70.photobucket.com/albums/i100/bonvo/wtf-1.jpg

where do i go from here

got the same message

[jnhrdng]

Post content deleted by poster. Reason : It was irrelevant.

[letchymonk]

well crud i hate that they (game companies) keep the copyright for stuff they dont make or sell any more lol ex : psx,atari,yada,yada. so im just gonna try to find the comm cable and stuff as i own my first psx still just cant find the power cable lol

[MadasaHatter]

ASDFGHJKL. I cannot figure this out. I think my computer is too much of a dinosaur for Playstation games...Help? :dry:

[otani39]

I hope this gets look at. I have been trying for over 4 years to get the ps1 emulator for just 2 games (grand turismo 1 and 2) so far everyone has been able to get a fully working pse and I have not been able to get it. So far step by step instructions have failed and even you tube videos keep failing. Either the written steps are so confusing that I need help with, or such steps like in the video I saw i got everything until it kept saying i was missing 1 file, then another then another until i go fed up with it. All i want is those two games so i can play them with a friend. Can anyone truly help me with this? Seriously I am thinking be so much better to just pay for it than all this 4 years wasted looking to make it work.

[ulaoulao]

Can anyone truly help me with this? Sure but we do need specifics. Start with you commuter specs. The try to run the game and tell us what symptoms and errors you get. Also what emulator and version you have.

[montpics]

Wow, thinks this guide really need remade.

[testmachine]

Wow, thinks this guide really need remade.

I remade it.
http://forums.emulator-zone.com/showthread.php?t=21580

[Deafman196823]

I have the latest Emulator but the Problem is that I don't know how to get it running properly epxse 1.9.0 is the version I am currently using and it is causing a lot of problems and Can you help me out with this? I am deaf BTW and I don't communicate very well. But I am sure you would understand my situation. The Problem is that whenever I try to load the Legends of Dragoon game and it goes blank and nothing appears on the Screen at all and I need this sorted fast so that I can try and finish off the game.

[Mupen64 Man]

What type of problems are you experiencing? Configuration? Graphics flickering? error pop ups?

[Deafman196823]

who are u talking to??? me?? if that is me that u are talking too please answer me thru proper channels!!!!!

[ulaoulao]

who are u talking to??? me?? if that is me that u are talking too please answer me thru proper channels!!!!!

If someone does not quote they generally are referring to the post above them. So yes that would be you. Now here you go, making the same mistake if you will? Further what is this proper channel nonsense? You said you were deaf not blind? The normal means of communication on a forum, is to post on the forum. So why are you upset with what Mupen64 Man
did? What exactly do you want from us?

[shantakbora3y]

error pop ups?

[denimkaty]

Many Tutuapp (https://tutuapp.uno/) 9Apps (https://9apps.ooo/) ShowBox (https://showbox.kim/) thanks onewecallgod. *thumbs up* :)

2) Once the file is finished downloading double-click it's icon. The file should automatically open in an archiving program such as Winzip or WinRAR. If you don't have such a program you can download one from either of these locations...

[Helmichde]

I have problem With PSCX 2 0.9.6 .... when i run the cd it says that the BIOS file is missing, so what do I do? If I need to download the BIOS file can someone put the link here 'coz I can't find it....

[Master M]

I have an LG Aristo 2 Android, and am looking for a free playstation 1 emulator that has 16x speed capability. Preferably from a source that doesn't come with adware that automatically creates a large amount of unwanted notifications, and an extract option included in the emulator.

I've had a PS1 emulator before on a different device without any problem, and I remember just needing to download the emulator and roms (no zipfiles as the emulator came with an extract option and no PS1 bios). I know it exists. Please, any assistance would be greatly appreciated.

[kevlevrone]

Hi there. I am not good at setups and configuration so it is interesting thead for me. Thanks

[jaxon]

you're missing ASPI layer, give a try to forceASPI. If you're using win 2k/Xp you can switch to SPTI (IOCTL).

Anyway, to use an *original* FF9 PAL CD on ePSXe, you'll need the specific patches. Get only the Omegle tv (https://omegle.site/) files for your region (PAL UK). Then unzip the patches (.ppf) to ePSXe "patches" folder, then rename each one acording its respective CDs: In FF9 CD number 1 main folder there is a file named "SLES_029.69". Rename the .pff exactlly as that file, the same for the other CDs, but note the SLES_#.29.69 will have "1", "2", and "3" instead "#".
Don't forget to and leave them on the "patches" folder. Should load OK then

[vaytienforyou]

Thông báo má»›i dÃ*nh cho ngÆ°á»�i cần bạc từ 18 + nhé má»�i ngÆ°á»�i.
DÃ*nh ra 3 phút để nháº*p CMND anh chị có 5tr tiêu.
Hạn mức khách má»›i tối Ä‘a 4 trd lần sau nháº*n đến 10 trd.
�ăng ký: https://instabio.cc/nhanngay