View Full Version : Rune Factory on the No$GBA - Bugs
Has anyone managed to get the save games working?
It runs decently, with only a few glitches, but I've tried all the NDS Cartridge Backup Media choices, and none will make a save that can be loaded again.
Since load/save states also don't work yet, there's no way to save at all yet apparently.
RockmanForte
08-16-2007, 18:45
Set it to FLASH 256kbytes
... that doesn't work for me.
This is the USA version of Rune Factory.
Does that work for you? What are your other settings?
RockmanForte
08-16-2007, 23:28
Okay, what save type did you tried ?
Looks like Ace Attorney 2 has the same problem. None of the save battery choices works with it.
HARVESTER
08-17-2007, 11:23
Looks like Ace Attorney 2 has the same problem. None of the save battery choices works with it.
well we can try playing it in ideas.. it has slow speed but it sure does have save states
RockmanForte
08-17-2007, 14:33
Looks like Ace Attorney 2 has the same problem. None of the save battery choices works with it.
No, something is wrong. Ace Attorney 2 works fine with save type:
Savetype: Set it to FLASH 512kybtes
No problem. Obvious something is wrong with you and I dont know what to help you. You are using 2.4c ?
Yes I am.. hmm.. this is odd. Even with that it says 'save failed'.
RockmanForte
08-17-2007, 19:30
Can you show your screenshot of your no$gba inside the folder please ? Thanks.
Well, its only these two games I have the problem with that way -- so far. The original Ace Attorney, Harvest Moon, other stuff works fine.
I tried a fresh install of no$gba, and finding firmware from different sources in case there was a problem there, but that didn't change a thing.
I'm running Vista-64, but since everything else has worked normally with this I doubt that's it.
Here's a screenshot:
http://www.gameperfection.com/journal/images/ScreenShot.png
RockmanForte
08-17-2007, 21:59
OH vista... I do not know about it. It could be the reason... Mine is Windows XP Home Editions.
With the new release of no$GBA I was able to get Ace Attorney 2 working!
I found that you can't change the battery type after you start the game to test it, you have to reset each time.
I still can't get Rune Factory to work, but maybe after the next updates in a few months. Thanks for the help!
Meanwhile if anyone has a working save of Rune Factory in no$cash, if you upload it I'd really appreciate it! I'd like to test it out.
RockmanForte
08-23-2007, 20:00
With the new release of no$GBA I was able to get Ace Attorney 2 working!
I found that you can't change the battery type after you start the game to test it, you have to reset each time.
I still can't get Rune Factory to work, but maybe after the next updates in a few months. Thanks for the help!
Meanwhile if anyone has a working save of Rune Factory in no$cash, if you upload it I'd really appreciate it! I'd like to test it out.
I was told this:
It'll load if you keep trying. Sometimes I can do it the first time launching the emu, other times it takes me 10 minutes or so of restarting before it'll actually load.
64kbytes is what you need.
You're right!!! Amazing!! Sometimes the save shows up, sometimes it doesn't, and sometimes it loads and sometimes it freezes.
But you can get it to work if you just keep restarting no$GBA.
Who'dve thought?
Thanks a great deal! I really appreciate how you helped me out so much! :) I am enjoying the game now.
- Shin +
RockmanForte
08-24-2007, 01:03
You're right!!! Amazing!! Sometimes the save shows up, sometimes it doesn't, and sometimes it loads and sometimes it freezes.
But you can get it to work if you just keep restarting no$GBA.
Who'dve thought?
Thanks a great deal! I really appreciate how you helped me out so much! :) I am enjoying the game now.
- Shin +
You are welcome. In other forums.. We answered a lots and helpful and they got everything they need from us. That's what I am doing... Help you out like we did for them. ;) ENJOY!
Harvestsprite_Nova
08-24-2007, 17:37
I was told this:
64kbytes is what you need.
did u mean EEPROM64KBytes?
anyway i started using that and saved...now today i don't have my saved file...i've been reseting the game for about an hour now >.< any suggestions?
RE: EEPROM64KBytes
Yes that's it. It works for me with that , and I'm up to the second cave.
Try resetting the cart or restarting no$GBA, and make sure you have that choice set all the time, don't change it.
I back up the saves now and then to another folder just in case too.
Sometimes the intro movie freezes up when you click in too, but if you set it to 100% speed it usually takes me from 1-15 times to get it going. Clunky but it's a fun game!
Harvestsprite_Nova
08-25-2007, 00:22
RE: EEPROM64KBytes
Yes that's it. It works for me with that , and I'm up to the second cave.
Try resetting the cart or restarting no$GBA, and make sure you have that choice set all the time, don't change it.
I back up the saves now and then to another folder just in case too.
Sometimes the intro movie freezes up when you click in too, but if you set it to 100% speed it usually takes me from 1-15 times to get it going. Clunky but it's a fun game!
>.< that wat i been doing...anything else i can do?
Harvestsprite_Nova
08-25-2007, 00:41
srry X that i wont load the game it just stays at loading after i click my file
Well, if it's a fresh save, delete it and start a new one, and make sure you have the latest version of no$GBA.
I have the same problem with Rune Factory although mine is more specifically a white screen right after the opening movie (or if I click/press anything) :(
RE: EEPROM64KBytes
Yes that's it. It works for me with that , and I'm up to the second cave.
Try resetting the cart or restarting no$GBA, and make sure you have that choice set all the time, don't change it.
I back up the saves now and then to another folder just in case too.
Sometimes the intro movie freezes up when you click in too, but if you set it to 100% speed it usually takes me from 1-15 times to get it going. Clunky but it's a fun game!
Sorry but I can't find EEPROM64KBytes in my options. I only have FLASH 64 options and EEPROM 8K AND 0.5K. What's wrong?
P.S. I use No$gba v2.6a, if that helps...
I have 2.6, and do not have that problem.
Reinstall? Go to an older ver?
RockmanForte
04-23-2008, 05:43
Yeah, use 2.6 and not 2.6a because it have a bug.
Yep I just got the older No$GBA and I changed the setting to EEPROM64KBytes as everyone said and it works! Thanks so much everyone. Very much appreciated :)
I just hope the saves work arghh! Guess I'll find out sooner or later.
Kazuhiko666
09-01-2008, 23:32
An older virsion of No$GBA were can i find that??? O.O
I tryd some of your hints but it still wont work. whats up damn it?
vBulletin® v3.8.4, Copyright ©2000-2009, Jelsoft Enterprises Ltd.